HES 9600 Windstorm Surface-Mounted Rim Exit Electric Strike

The HES 9600 is a windstorm-resistant, surface-mounted electric strike designed for rim exit devices with 3/4″ Pullman latchbolts. All components are encased in a slim 3/4″ thick stainless steel housing, eliminating the need for cutting the frame during installation. Simply align the strike on the door frame with the exit device’s latchbolt and fasten it in place for a quick, hassle-free setup. This Grade 1 strike is built to withstand extreme conditions and heavy use, exceeding ANSI Windstorm testing standards for door hardware.

Product Overview

Easy Installation & Adjustment

The 9600 Series simplifies installation with a separate mounting base and decorative cover that make horizontal adjustment easy. Its non-handed design fits left or right-hand doors, and the strike is field-configurable for either fail-secure or fail-safe operation as needed. The unit supports both 12 V and 24 V DC inputs without requiring any special tools or parts. Because it mounts directly on the frame surface (wood or metal), the 9600 requires only minimal prep work, making it ideal for retrofits or new installations where preserving the door frame is important.

High Strength & Reliable Performance

The HES 9600 is built to be the toughest and strongest magnetic strike. This strike provides a holding force of over 2000 lbs static, and can resist significant impact of up to 120 ft-lbs dynamic, which is well beyond any Grade 1 spec. Inside of the strike, the solenoid mechanism is enclosed inside a tamper resistant stainless-steel housing to provide durability and reliability in every environment. With over 1,000,000 cycles of operation tested, the HES 9600 is a high level strike that provides dependability for the busiest entrances and traffic areas. The robust stainless-steel housing provides durability and strength for the 9600 to be used both indoors and outdoors.

Optional Monitoring & Warranty

With the optional Latchbolt Monitor (LBM) and Latchbolt Strike Monitor (LBSM) outputs, you can integrate optional real-time door status feedback for access control systems. The 9600 Series is covered by a SecuriCare 5-year no-fault warranty from HES, which may be extended to a 10-year warranty with the addition of an HES SMART Pac III module. This warranty coverage highlights the manufacturer’s association to the quality of the 9600 and the confidence level for its reliability and durability over an extended period.

Product Features

• Surface-mounted no-cut design: Mount to wood or metal frames without cutting any frames for fast and easy installation.
• High strength (Grade 1): The stainless steel strike body has a holding force of 2,000 lbs static and 120 ft-lbs of dynamic force.
• Versatile configuration: Non-handed strike body fits left or right-swing doors, and can fail-secure/fail-safe with either 12V or 24V DC input.
• Easy horizontal adjustment: Strike can be adjusted horizontally with separate base and cover after mounting the base for the correct horizontal positioning of the latchbolt for engagement.
• Optional monitoring: Provides flexibility for latchbolt monitoring (LBM) and strike monitoring (LBSM) options which can monitor both the latchbolt strike - to interface with access control systems.
• Durable and tamper-resistant: Cycle-tested and operational life expectancy is over 1,000,000 cycles without failure; tamper-resistant housing and all-metal construction can be considered durable.

Technical Specifications

Application	Surface mounted electric strike for rim exit devices. Will work with up to 3/4" throw Pullman Latchbolt
Frame type	For installation on either wood or metal door frames (surface mount - no cut required)
Operating mode	Field-selectable for fail-secure (power-to-unlock) or fail-safe (power-to-lock) operation
Voltage	Dual-voltage 12 VDC or 24 VDC (DC continuous duty) input
Current draw	~500 mA @ 12 VDC; 250 mA @ 24 VDC (continuous duty)
Holding force	2,000 lbs static; 120 ft-lbs dynamic impact resistance
Endurance	Tested to 1,000,000+ cycle engagements
Monitoring	Optional Latchbolt Monitor (LBM) and Latchbolt Strike Monitor (LBSM) outputs available
Dimensions (HxWxD)	9″ x 1.75″ x 0.75″ (228.6 mm x 44.5 mm x 19 mm)

Available Finishes

• Bright Brass (605): Polished bright brass finish.
• Satin Brass (606): Satin-finish brass (matte gold tone).
• Satin Bronze (612): Satin medium bronze finish.
• Bronze Toned (613): Dark bronze-toned finish (equivalent to oil-rubbed bronze).
• Dark Oxidized Satin Bronze (613E): Dark oxidized satin bronze, powder-coated.
• Bright Stainless Steel (629): Bright polished stainless steel finish.
• Satin Stainless Steel (630) Brushed satin stainless steel finish (US32D).
• Black Suede Powder (BSP): Textured matte black powder coat finish.

Warranty & Certifications

• Warranty: Covered by HES SecuriCare 5-year no-fault warranty (no questions asked), extendable to 10 years with the addition of an HES SMART Pac III.
• ANSI/BHMA A156.31 Grade 1: Certified Grade 1 (highest performance grade) for electric strike durability and security.
• ANSI/SDI A250.13 (Windstorm): Tested and certified for extreme windstorm resistance (good for hurricane/tornado region use).
• ASTM E330: Structural integrity certified for very high wind load pressures on doors and frames.
• Florida Building Code (FL# 14307): Approved for hurricane-rated openings in accordance with Florida Building Code.
• UL 1034 Burglary-Resistant: UL listed for burglary resistance; can be used outdoors in secure applications.
• UL 294: Meets UL 294 standard for access control system units (ensures safe operation within electronic security systems).
• UL 305: Compliant with UL 305 standards for panic hardware (suitable for use with exit devices on emergency exits).
• RoHS Compliant: All materials are lead-free and free of all hazardous materials, so it meets environmental requirements.

Product Resources

• HES & Securitron Product Catalog (PDF)
• HES 9600 Series Electric Strike Data Sheet (PDF)
• HES 9400/9500/9600 Series Installation Instructions (PDF)
• Installing the HES 9600 Strike (MTK-9000 Template) – Official Video

Accessories & Related Products

• Spacer Plates (1/16" & 1/8") – Thin shims to adjust the strike's position for proper latch engagement (finished to match the strike)
• Aluminum Spacer Bracket (9000-ASB) – 1/2" thick aluminum bracket for mounting the strike in frames with large gaps or recesses
• Surface Mounting Box (SMB) – Surface-mount box that encloses the strike for fully external mounting (protects and hides wiring)
• Metal Template Kit (9000-MTK) – Reusable metal template for precisely marking drill holes and cutouts, ensuring accurate installation alignment
• SMART Pac III (2005M3) – In-line power controller that filters surges and inrush, extending the strike’s warranty to 10 years
• Plug-in Bridge Rectifier (2001M) – Module that allows use of an AC power source by converting AC input into DC output for the strike
• ElectroLynx Adapter (2004M) – Quick-connect adapter for plug-and-play wiring integration with ElectroLynx door harness systems
• Plug-in Buzzer (2006M) – Add-on audible buzzer that provides a buzzing sound when the strike is energized (useful for door annunciation)
• Blind Nuts (BN-250) – Set of 1/4"-20 threaded blind nuts for secure mounting in hollow metal frames (provides internal threads when back access is limited)
• HES 9400 Series – Fire-rated surface-mounted strike for rim exit devices (3-hour fire door rated) that supports up to a 3/4" latch throw
• HES 9500 Series – Windstorm-rated surface strike for rim exit devices up to a 3/4" latch throw (built for high-wind and impact compliance)
• HES 9700 Series – Heavy-duty surface strike designed for squarebolt rim exit devices (e.g. Corbin Russwin SecureBolt, Yale SquareBolt) with both windstorm and fire ratings