Securitron MKA2 Mortise Keyswitch, DPDT Alternate, Single Gang
-
MPN: MKA2
-
JMAC ID: 200003611
The Securitron MKA2 is a single-gang mortise keyswitch designed for key-operated control of electric locks, alarm systems, and access control equipment. Featuring a double-pole, double-throw (DPDT) alternate-action switch, integrated 12/24 VDC bicolor LED, and brushed stainless steel faceplate, the MKA2 provides maintained switching through a standard mortise cylinder. Its adjustable mounting bracket, tamper-resistant screws, and compatibility with 1-1/8-inch and 1-1/4-inch mortise cylinders support secure, authorized control of commercial electronic locking systems.
Securitron MKA2 DPDT Alternate-Action Mortise Keyswitch with Bicolor LED
The Securitron MKA2 Mortise Keyswitch provides key-operated electrical switching for commercial access control and security applications in offices, institutional facilities, warehouses, and secured building entrances. Featuring a double-pole, double-throw (DPDT) alternate-action switch, the MKA2 allows authorized personnel to change and maintain an electrical circuit state by turning a key. Its two-pole switching arrangement supports control of separate circuits for applications such as electric lock operation, alarm panel arming, system reset, and security overrides. The unit features a brushed stainless steel single-gang faceplate, integrated red/green LED indicator, and tamper-resistant mounting screws for installations requiring controlled access to security system functions.
The MKA2 uses an alternate-action, push-on/push-off switch mechanism that maintains its selected electrical contact state until the key is operated again. Its DPDT configuration provides two electrically separate switching poles with normally open, normally closed, and common contact functions. The integrated bicolor LED supports 12 VDC or 24 VDC operation, with red and green illumination available for displaying lock, alarm, or system status. The manufacturer specifies a 5A-rated plunger switch in product literature, while its installation instructions specify a maximum contact current of 3A. The switch assembly provides electrical control signals rather than generating power for connected locking devices, making correct circuit sizing and interface selection essential.
The Securitron MKA2 accepts standard 1-1/8-inch (28 mm) and 1-1/4-inch (32 mm) mortise cylinders, with support for 1-1/2-inch cylinders when an appropriate spacer ring is installed. Its adjustable backing bracket accommodates common mortise cylinder cam configurations, including bat and cloverleaf cams. Installers can position the switch for activation through clockwise or counterclockwise key rotation, while an additional bracket position accommodates a separately purchased switch for opposite-direction operation. The assembly includes mounting hardware and tamper-resistant screws, along with a mounting frame for appropriate drywall installations. The mortise cylinder and cam are supplied separately, allowing integration with an existing facility key system.
The Securitron MKA2 Single-Gang Keyswitch is suited for commercial access control installations requiring maintained, key-authorized control of electronic locking and security equipment. Its DPDT switching capability, stainless steel construction, configurable cylinder mounting, and dual-color status indicator support integration with electric strikes, electromagnetic lock control circuits, alarm panels, and compatible security controllers. The unit is backed by Securitron's MagnaCare lifetime replacement warranty, subject to manufacturer terms. Installation requires appropriate switch contact wiring, LED voltage configuration, compatible mortise cylinder selection, and verification of the connected equipment's electrical requirements. The MKA2 provides alternate-action control rather than momentary switching and must be integrated according to applicable electrical and life safety requirements.
UPC: 784607023074
Also known as: SN-MKA2, HES-MKA2
Technical Specifications:
|
For more information about the Securitron MKA2, please contact us.
- 5 Amp rated plunger switch
- Backing bracket permits integration with any 1-1/4" [32mm] or 1-1/8" [28mm] mortise cylinder (not included)
- Additional switch position on backing bracket allows another switch to be activated by turning the key in the opposite direction
- DPDT alternate action
- Single gang
- Standard with 12 or 24VDC bi-color LED
- SC Keyway
- 1-1/8" Length, 26D Finish
- Cylinder available for use in the MK
- Includes anti-tamper screws
2 Reviews
-
SECURITRON-MKA2
-
SECURITRON-MKA2