516-812-0917
Help
Live Chat
The Schlage HL6-9080 combines HL6 push/pull hardware with the Schlage L Series heavy duty mortise lock in the 9080 storeroom function (ANSI F07). The outside paddle is always inoperable. The latchbolt is retracted by the inside paddle or by key from outside, and there is no lock or unlock state to set - the door is simply always secured against entry.
That makes it the specification for supply rooms, clean and soiled utility, medication and equipment storage, server rooms, and any space where entry should always require a key and nobody should be able to leave it standing unlocked. Because the outside paddle never retracts the latch, the door cannot be accidentally left open to anyone without a key.
Exit is unaffected. The inside paddle is always free for immediate egress, and its short throw angle opens the door with an easy push even when hands are not free, which matters when staff leave a supply room carrying loads. An auxiliary latch deadlocks the latchbolt when the door is closed.
The rest is standard HL6 mortise: a 3/4 inch throw stainless steel latchbolt, an ASA strike, a UL Listing for 3 hour fire doors up to 4 ft by 10 ft, and dampened paddle action giving a proven 50 percent quieter operation than the previous generation, in 10 finishes including antimicrobial 626AM and 630AM.
Features
- Storeroom function - the outside paddle is always inoperable, so the door is permanently secured against entry.
- Latchbolt retracted by the inside paddle or by key from outside.
- No lock or unlock state to set, so the door cannot be left standing unlocked.
- Hands free exit - short throw angle opens the door with a push of the inside paddle.
- Inside paddle always free for immediate egress.
- Auxiliary latch deadlocks the latchbolt when the door is closed.
- Schlage L Series heavy duty mortise lock case behind HL6 push/pull trim.
- 3/4 inch throw stainless steel latchbolt.
- 50 percent quieter paddle operation than the previous generation, in both push and pull directions.
- Non-handed, with five mounting positions.
- ASA strike standard, with a bent tab strike available.
- UL Listed for 3 hour fire doors, 4 ft by 10 ft, on single labeled metal or wood doors.
Specifications
General
- Type
- Mortise push/pull hardware
- Function
- 9080 storeroom lock, ANSI F07
- Operation
- Latchbolt retracted by the inside paddle or by key outside. Outside paddle always inoperable. Inside paddle always free for immediate egress
- Auxiliary Latch
- Deadlocks the latchbolt when the door is closed
- Keying
- Key operated from outside with no thumbturn, so a mortise cylinder is part of the opening. Confirm cylinder, keyway, and keying with your order
- Lock Case
- Schlage L Series heavy duty mortise lock
- Latchbolt
- 3/4 inch throw stainless steel
- Backset
- 2-3/4 inch only
- Strike
- ASA strike standard; bent tab (BT) strike optional
- Handing
- Non-handed
- Door Thickness
- 1-3/4 inch only. Other thicknesses available upon request
- Certification
- UL Listed for 3 hour fire door, 4 ft by 10 ft, single labeled metal or wood doors
Dimensions
- Body
- 2-9/16 x 5-1/2 inches
- Paddle
- 1-1/2 x 4-1/2 inches
- Projection from Door
- 2-5/8 inches maximum
Mounting Positions
- Available Positions
- Handles down; handles up; one handle up and one handle down (push or pull); handles point away from latch
- Note
- Specify the mounting position with the order so the hardware arrives oriented for the opening
Ordering Guide
- Order Sequence
- Product and function, finish, option, engraving, strike. Example: HL6-9080, 626AM, SOC, E1, BT. The mortise backset is left blank because it is always 2-3/4 inch
- Finishes
- 605 bright brass (US3); 606 satin brass (US4); 612 satin bronze (US10); 613 oil rubbed bronze (US10B); 625 bright chrome (US26); 626 satin chrome (US26D); 626AM satin chrome antimicrobial; 629 bright stainless steel (US32); 630 satin stainless steel (US32D); 630AM satin stainless steel antimicrobial
- B
- Brass base material, for the 626 finish, where required by specification
- EN / EO
- Entrance only supplies the pull handle only; exit only supplies the push handle only. Both leave a single paddle, so confirm the arrangement against the locking function before ordering
- L
- Lead lining - lead components cover the cut-outs made in lead lined doors
- SOC
- Pin-in-socket security screws supplied in place of standard screws for the strike, latchbolt, and covers
- Strike Codes
- Leave blank for the standard ASA strike, or specify BT for the bent tab strike
- Engraving
- E1 push up, pull down. E2 push up, pull up. E5 push down, pull up. E6 push down, pull down. E3 horizontal engraving, right hand. E4 horizontal engraving, left hand
Applications
- Designed For
- Rooms that must always require a key to enter, in environments where operational noise is disruptive
- Typical Openings
- Supply rooms, clean and soiled utility, medication and equipment storage; server and plant rooms; secured back of house spaces on busy corridors
Frequently Asked Questions
- What does 9080 mean?
- It is the Schlage mortise lock function: 9080 storeroom, ANSI F07. The outside paddle is always inoperable and the latch is retracted by the inside paddle or by key from outside.
- How is this different from the 9070 classroom?
- The 9070 can be locked and unlocked by key, so the door can be left in an unlocked state. The 9080 has no unlocked state - the outside paddle never retracts the latch, so entry always requires a key.
- Can people inside still get out?
- Yes. The inside paddle is always free for immediate egress, and it works hands free, which matters when staff are leaving a supply room carrying loads.
- So what is the outside paddle for?
- It serves as the pull for the door. It does not retract the latch, which is done with the key from outside.
- Does it need a cylinder?
- Yes. The 9080 is key operated from outside, so a mortise cylinder is part of the opening. Tell us your keyway and whether the cylinder should be keyed to an existing system, and we will confirm it with the order.
- What does the auxiliary latch do?
- It deadlocks the latchbolt once the door is closed, so the latch cannot be pushed back out of the strike from outside.
- Which HL6 mortise function do I want?
- 9010 never locks. 9040 is thumbturn privacy. 9050 locks by key or thumbturn. 9060 locks by key from inside. 9070 locks by key from outside. 9080 is always locked to the outside.
- Is it handed?
- The hardware is non-handed and mounts in five positions - handles down, handles up, one up and one down, or pointing away from the latch. Note that the E3 and E4 horizontal engraving codes are handed, so specify right or left hand for those.
- Can it go on a fire door?
- Yes. It is UL Listed for 3 hour fire doors up to 4 ft by 10 ft on single labeled metal or wood doors.
- Will it fit my door?
- It is made for 1-3/4 inch doors on a 2-3/4 inch backset. Other thicknesses are available from Schlage on request, so contact us if your door differs.
