516-812-0917
Help
Live Chat
The Schlage HL6-9070 combines HL6 push/pull hardware with the Schlage L Series heavy duty mortise lock in the 9070 classroom function (ANSI F05). The latchbolt is retracted by the paddle from either side unless the outside paddle is locked by key, and it is unlocked again from outside by key.
Locking from the corridor side is what defines a classroom function. Staff secure the door with a key from outside without opening it or stepping in, so an occupied room can be locked down in seconds from the hallway. There is no thumbturn, which means the locked state stays under keyholder control and cannot be changed by anyone inside the room.
An auxiliary latch deadlocks the latchbolt when the door is closed, and the inside paddle is always free for immediate egress regardless of lock state. The rest is standard HL6 mortise: a 3/4 inch throw stainless steel latchbolt, an ASA strike, a UL Listing for 3 hour fire doors up to 4 ft by 10 ft, and dampened paddle action giving a proven 50 percent quieter operation than the previous generation, in 10 finishes including antimicrobial 626AM and 630AM.
Features
- Classroom function - the outside paddle is locked and unlocked by key from outside.
- Lock the door from the corridor without opening it or entering the room.
- No thumbturn, so the locked state stays under keyholder control.
- Hands free operation - short throw angle opens the door with a push or pull of the paddle.
- Auxiliary latch deadlocks the latchbolt when the door is closed.
- Inside paddle always free for immediate egress.
- Schlage L Series heavy duty mortise lock case behind HL6 push/pull trim.
- 3/4 inch throw stainless steel latchbolt.
- 50 percent quieter paddle operation than the previous generation, in both push and pull directions.
- Non-handed, with five mounting positions.
- ASA strike standard, with a bent tab strike available.
- UL Listed for 3 hour fire doors, 4 ft by 10 ft, on single labeled metal or wood doors.
Specifications
General
- Type
- Mortise push/pull hardware
- Function
- 9070 classroom lock, ANSI F05
- Operation
- Latchbolt retracted by the paddle from either side unless the outside paddle is locked by key. Unlocked from outside by key. Inside paddle always free for immediate egress
- Auxiliary Latch
- Deadlocks the latchbolt when the door is closed
- Keying
- Key operated from outside with no thumbturn, so a mortise cylinder is part of the opening. Confirm cylinder, keyway, and keying with your order
- Lock Case
- Schlage L Series heavy duty mortise lock
- Latchbolt
- 3/4 inch throw stainless steel
- Backset
- 2-3/4 inch only
- Strike
- ASA strike standard; bent tab (BT) strike optional
- Handing
- Non-handed
- Door Thickness
- 1-3/4 inch only. Other thicknesses available upon request
- Certification
- UL Listed for 3 hour fire door, 4 ft by 10 ft, single labeled metal or wood doors
Dimensions
- Body
- 2-9/16 x 5-1/2 inches
- Paddle
- 1-1/2 x 4-1/2 inches
- Projection from Door
- 2-5/8 inches maximum
Mounting Positions
- Available Positions
- Handles down; handles up; one handle up and one handle down (push or pull); handles point away from latch
- Note
- Specify the mounting position with the order so the hardware arrives oriented for the opening
Ordering Guide
- Order Sequence
- Product and function, finish, option, engraving, strike. Example: HL6-9070, 626AM, SOC, E1, BT. The mortise backset is left blank because it is always 2-3/4 inch
- Finishes
- 605 bright brass (US3); 606 satin brass (US4); 612 satin bronze (US10); 613 oil rubbed bronze (US10B); 625 bright chrome (US26); 626 satin chrome (US26D); 626AM satin chrome antimicrobial; 629 bright stainless steel (US32); 630 satin stainless steel (US32D); 630AM satin stainless steel antimicrobial
- B
- Brass base material, for the 626 finish, where required by specification
- EN / EO
- Entrance only supplies the pull handle only; exit only supplies the push handle only. Both leave a single paddle, so confirm the arrangement against the locking function before ordering
- L
- Lead lining - lead components cover the cut-outs made in lead lined doors
- SOC
- Pin-in-socket security screws supplied in place of standard screws for the strike, latchbolt, and covers
- Strike Codes
- Leave blank for the standard ASA strike, or specify BT for the bent tab strike
- Engraving
- E1 push up, pull down. E2 push up, pull up. E5 push down, pull up. E6 push down, pull down. E3 horizontal engraving, right hand. E4 horizontal engraving, left hand
Applications
- Designed For
- Rooms that need to be secured from the corridor side by staff, in environments where operational noise is disruptive
- Typical Openings
- Classrooms and teaching spaces; treatment and exam rooms; work areas and stations where concentration is important
Frequently Asked Questions
- What does 9070 mean?
- It is the Schlage mortise lock function: 9070 classroom, ANSI F05. The outside paddle is locked and unlocked by key from outside.
- How is this different from the 9060?
- Which side holds the key. The 9060 apartment entrance is locked by key from the inside. The 9070 classroom is locked and unlocked by key from the outside, so the door is secured from the corridor.
- Can I lock the room without going in?
- Yes, and that is the point of the function. Turn the key from the corridor side and the outside paddle stops retracting the latch, with no need to open the door or step inside.
- Can people inside still get out?
- Yes. The inside paddle is always free for immediate egress, whatever the lock state. Locking only stops entry from outside.
- Is there a thumbturn?
- No. The 9070 has no thumbturn, so occupants cannot change the locked state. Control stays with whoever holds the key. If you want the door lockable from inside without a key, look at the 9050 entrance and office function instead.
- Does it need a cylinder?
- Yes. The 9070 is key operated from outside, so a mortise cylinder is part of the opening. Tell us your keyway and whether the cylinder should be keyed to an existing system and we will confirm it with the order.
- Which HL6 mortise function do I want?
- 9010 passage never locks. 9040 is bath and bedroom privacy, thumbturn only. 9050 entrance and office locks by key or thumbturn. 9060 apartment entrance locks by key from inside. 9070 classroom locks by key from outside.
- What does the auxiliary latch do?
- It deadlocks the latchbolt once the door is closed, so the latch cannot be pushed back out of the strike from outside.
- Is it handed?
- The hardware is non-handed and mounts in five positions - handles down, handles up, one up and one down, or pointing away from the latch. Note that the E3 and E4 horizontal engraving codes are handed, so specify right or left hand for those.
- Can it go on a fire door?
- Yes. It is UL Listed for 3 hour fire doors up to 4 ft by 10 ft on single labeled metal or wood doors.
