516-812-0917
Help
Live Chat
The HL6-9060 combines HL6 push/pull hardware with the Schlage L Series heavy duty mortise lock in the 9060 apartment entrance function (ANSI F09). The latchbolt is retracted by the paddle from either side until the outside is locked by key from the inside. Once locked, the latchbolt is retracted by key or by the inside paddle.
Locking by key rather than by thumbturn is the point of this function. Nobody can secure the door by simply flipping a turn on the way past, so the opening cannot be casually locked by a passer-by or a patient - it takes a keyholder. That suits apartment style entrances, resident rooms, and any door where control of the locked state needs to sit with staff rather than with whoever is standing closest.
An auxiliary latch deadlocks the latchbolt when the door is closed, and the inside paddle is always free for immediate egress regardless of lock state. The rest is standard HL6 mortise: a 3/4 inch throw stainless steel latchbolt, an ASA strike, a UL Listing for 3 hour fire doors up to 4 ft by 10 ft, and dampened paddle action giving a proven 50 percent quieter operation than the previous generation, in 10 finishes including antimicrobial 626AM and 630AM.
Features
- Apartment entrance function - the outside is locked by key from the inside.
- No thumbturn, so the door cannot be locked without a key.
- Hands free operation - short throw angle opens the door with a push or pull of the paddle.
- When locked, the latchbolt is retracted by key or inside paddle.
- Auxiliary latch deadlocks the latchbolt when the door is closed.
- Inside paddle always free for immediate egress.
- Schlage L Series heavy duty mortise lock case behind HL6 push/pull trim.
- 3/4 inch throw stainless steel latchbolt.
- 50 percent quieter paddle operation than the previous generation, in both push and pull directions.
- Non-handed, with five mounting positions.
- ASA strike standard, with a bent tab strike available.
- UL Listed for 3 hour fire doors, 4 ft by 10 ft, on single labeled metal or wood doors.
Specifications
General
- Type
- Mortise push/pull hardware
- Function
- 9060 apartment entrance lock, ANSI F09
- Operation
- Latchbolt retracted by the paddle from either side unless the outside is locked by key from the inside. When locked, the latchbolt is retracted by key or by the inside paddle. Inside paddle always free for immediate egress
- Auxiliary Latch
- Deadlocks the latchbolt when the door is closed
- Keying
- Key operated with no thumbturn, so mortise cylinders are part of the opening. Confirm cylinder count, keyway, and keying with your order
- Lock Case
- Schlage L Series heavy duty mortise lock
- Latchbolt
- 3/4 inch throw stainless steel
- Backset
- 2-3/4 inch only
- Strike
- ASA strike standard; bent tab (BT) strike optional
- Handing
- Non-handed
- Door Thickness
- 1-3/4 inch only. Other thicknesses available upon request
- Certification
- UL Listed for 3 hour fire door, 4 ft by 10 ft, single labeled metal or wood doors
Dimensions
- Body
- 2-9/16 x 5-1/2 inches
- Paddle
- 1-1/2 x 4-1/2 inches
- Projection from Door
- 2-5/8 inches maximum
Mounting Positions
- Available Positions
- Handles down; handles up; one handle up and one handle down (push or pull); handles point away from latch
- Note
- Specify the mounting position with the order so the hardware arrives oriented for the opening
Ordering Guide
- Order Sequence
- Product and function, finish, option, engraving, strike. Example: HL6-9060, 626AM, SOC, E1, BT. The mortise backset is left blank because it is always 2-3/4 inch
- Finishes
- 605 bright brass (US3); 606 satin brass (US4); 612 satin bronze (US10); 613 oil rubbed bronze (US10B); 625 bright chrome (US26); 626 satin chrome (US26D); 626AM satin chrome antimicrobial; 629 bright stainless steel (US32); 630 satin stainless steel (US32D); 630AM satin stainless steel antimicrobial
- B
- Brass base material, for the 626 finish, where required by specification
- EN / EO
- Entrance only supplies the pull handle only; exit only supplies the push handle only. Both leave a single paddle, so confirm the arrangement against the locking function before ordering
- L
- Lead lining - lead components cover the cut-outs made in lead lined doors
- SOC
- Pin-in-socket security screws supplied in place of standard screws for the strike, latchbolt, and covers
- Strike Codes
- Leave blank for the standard ASA strike, or specify BT for the bent tab strike
- Engraving
- E1 push up, pull down. E2 push up, pull up. E5 push down, pull up. E6 push down, pull down. E3 horizontal engraving, right hand. E4 horizontal engraving, left hand
Applications
- Designed For
- Doors where the locked state must be controlled by a keyholder rather than by anyone passing through, in environments where operational noise is disruptive
- Typical Openings
- Apartment style entrances and resident rooms; care areas where patients are sleeping and healing; staff controlled doors on busy corridors
Frequently Asked Questions
- What does 9060 mean?
- It is the Schlage mortise lock function: 9060 apartment entrance, ANSI F09. The outside is locked by key from the inside.
- How is this different from the 9050?
- The thumbturn. The 9050 entrance and office function locks by key or inside thumbturn. The 9060 has no thumbturn - it locks by key from the inside only. Choose 9060 when you do not want the door lockable by anyone without a key.
- Can I still get out when it is locked?
- Yes. The inside paddle is always free for immediate egress, whatever the lock state. Locking only stops entry from outside.
- Does it need cylinders?
- Yes. The 9060 is key operated with no thumbturn, so mortise cylinders are part of the opening. Tell us your keyway and whether the cylinders should be keyed to an existing system, and we will confirm the right cylinders and how many with your order.
- Which HL6 mortise function do I want?
- 9010 passage never locks. 9040 is bath and bedroom privacy, thumbturn only, releasing when the door closes. 9050 entrance and office locks by key or thumbturn and holds. 9060 locks by key from the inside only.
- What does the auxiliary latch do?
- It deadlocks the latchbolt once the door is closed, so the latch cannot be pushed back out of the strike from outside.
- Is it handed?
- The hardware is non-handed and mounts in five positions - handles down, handles up, one up and one down, or pointing away from the latch. Note that the E3 and E4 horizontal engraving codes are handed, so specify right or left hand for those.
- Can it go on a fire door?
- Yes. It is UL Listed for 3 hour fire doors up to 4 ft by 10 ft on single labeled metal or wood doors.
- Will it fit my door?
- It is made for 1-3/4 inch doors on a 2-3/4 inch backset. Other thicknesses are available from Schlage on request, so contact us if your door differs.
