516-812-0917
Help
Live Chat
The Schlage HL6-9050 combines HL6 push/pull hardware with the Schlage L Series heavy duty mortise lock in the 9050 entrance and office function (ANSI F04). It is the first locking, keyed function in the HL6 mortise line: the outside paddle is made inoperative by key or thumbturn, and once locked the latchbolt is retracted by the key or the inside paddle only.
That makes it the specification for offices, exam rooms, nurse stations, and back of house doors that staff need to secure at the end of a shift but walk through hands free all day. The outside paddle stays locked until it is unlocked by thumbturn or key, an auxiliary latch deadlocks the latchbolt when the door is closed, and the inside paddle is always free for immediate egress whatever the lock state.
The rest is standard HL6 mortise: a 3/4 inch throw stainless steel latchbolt, an ASA strike, a UL Listing for 3 hour fire doors up to 4 ft by 10 ft, and dampened paddle action giving a proven 50 percent quieter operation than the previous generation. Available in 10 finishes including antimicrobial 626AM and 630AM.
Features
- Entrance and office function - outside paddle made inoperative by key or thumbturn.
- Hands free operation - short throw angle opens the door with a push or pull of the paddle.
- With the outside locked, the latchbolt is retracted by key or inside paddle.
- Outside paddle stays locked until unlocked by thumbturn or key.
- Auxiliary latch deadlocks the latchbolt when the door is closed.
- Inside paddle always free for immediate egress.
- Schlage L Series heavy duty mortise lock case behind HL6 push/pull trim.
- 3/4 inch throw stainless steel latchbolt.
- 50 percent quieter paddle operation than the previous generation, in both push and pull directions.
- Non-handed, with five mounting positions.
- ASA strike standard, with a bent tab strike available.
- UL Listed for 3 hour fire doors, 4 ft by 10 ft, on single labeled metal or wood doors.
Specifications
General
- Type
- Mortise push/pull hardware
- Function
- 9050 entrance and office lock, ANSI F04
- Operation
- Latchbolt retracted by the paddle from either side unless the outside paddle is made inoperative by key or thumbturn. With the outside locked, the latchbolt is retracted by key or inside paddle. The outside paddle remains locked until unlocked by thumbturn or key. Inside paddle always free for immediate egress
- Auxiliary Latch
- Deadlocks the latchbolt when the door is closed
- Keying
- Key operated, so a mortise cylinder is part of the opening. Confirm cylinder, keyway, and keying with your order
- Lock Case
- Schlage L Series heavy duty mortise lock
- Latchbolt
- 3/4 inch throw stainless steel
- Backset
- 2-3/4 inch only
- Strike
- ASA strike standard; bent tab (BT) strike optional
- Handing
- Non-handed
- Door Thickness
- 1-3/4 inch only. Other thicknesses available upon request
- Certification
- UL Listed for 3 hour fire door, 4 ft by 10 ft, single labeled metal or wood doors
Dimensions
- Body
- 2-9/16 x 5-1/2 inches
- Paddle
- 1-1/2 x 4-1/2 inches
- Projection from Door
- 2-5/8 inches maximum
Mounting Positions
- Available Positions
- Handles down; handles up; one handle up and one handle down (push or pull); handles point away from latch
- Note
- Specify the mounting position with the order so the hardware arrives oriented for the opening
Ordering Guide
- Order Sequence
- Product and function, finish, option, engraving, strike. Example: HL6-9050, 626AM, SOC, E1, BT. The mortise backset is left blank because it is always 2-3/4 inch
- Finishes
- 605 bright brass (US3); 606 satin brass (US4); 612 satin bronze (US10); 613 oil rubbed bronze (US10B); 625 bright chrome (US26); 626 satin chrome (US26D); 626AM satin chrome antimicrobial; 629 bright stainless steel (US32); 630 satin stainless steel (US32D); 630AM satin stainless steel antimicrobial
- B
- Brass base material, for the 626 finish, where required by specification
- EN / EO
- Entrance only supplies the pull handle only; exit only supplies the push handle only. Both leave a single paddle, so confirm the arrangement against the locking function before ordering
- L
- Lead lining - lead components cover the cut-outs made in lead lined doors
- SOC
- Pin-in-socket security screws supplied in place of standard screws for the strike, latchbolt, and covers
- Strike Codes
- Leave blank for the standard ASA strike, or specify BT for the bent tab strike
- Engraving
- E1 push up, pull down. E2 push up, pull up. E5 push down, pull up. E6 push down, pull down. E3 horizontal engraving, right hand. E4 horizontal engraving, left hand
Applications
- Designed For
- Doors that must be securable by key or thumbturn but used hands free during the working day, in environments where operational noise is disruptive
- Typical Openings
- Offices and administrative areas; exam rooms and work stations; back of house doors on busy corridors
Frequently Asked Questions
- What does 9050 mean?
- It is the Schlage mortise lock function: 9050 entrance and office, ANSI F04. The outside paddle can be made inoperative by key or by the inside thumbturn.
- How does it actually lock?
- Turn the inside thumbturn, or use the key from outside, and the outside paddle stops retracting the latch. It stays that way until deliberately unlocked by thumbturn or key - it does not release when the door closes.
- Can I still get out when it is locked?
- Yes. The inside paddle is always free for immediate egress, no matter the lock state. Locking only stops entry from outside.
- Does it need a cylinder?
- Yes. The 9050 is a key operated function, so a mortise cylinder is part of the opening. Tell us your keyway and whether the cylinder should be keyed to an existing system, and we will confirm the right cylinder with the order.
- How is this different from the 9010 and 9040?
- Locking. The 9010 is passage and never locks. The 9040 is bath and bedroom privacy, thumbturn only with no key, releasing automatically when the door closes. The 9050 adds a key and holds its locked state until someone unlocks it.
- What does the auxiliary latch do?
- It deadlocks the latchbolt once the door is closed, so the latch cannot be pushed back out of the strike from the outside.
- Is it handed?
- The hardware is non-handed and mounts in five positions - handles down, handles up, one up and one down, or pointing away from the latch. Note that the E3 and E4 horizontal engraving codes are handed, so specify right or left hand for those.
- Can it go on a fire door?
- Yes. It is UL Listed for 3 hour fire doors up to 4 ft by 10 ft on single labeled metal or wood doors.
- Will it fit my door?
- It is made for 1-3/4 inch doors on a 2-3/4 inch backset. Other thicknesses are available from Schlage on request, so contact us if your door differs.
