Securitron XDT-24 Exit Delay Timer, 24VDC

  • MPN: XDT-24
  • JMAC ID: 200003659
$118.00
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200003659
df_manual_boost:
2.20

The Securitron XDT-24 is a 24 VDC modular exit delay timer designed to control delayed egress through doors equipped with compatible fail-safe electric locks. Featuring field-selectable 15- or 30-second exit delays, configurable 0-3-second nuisance delays, and three 5A SPDT relays, the XDT-24 supports controlled door release, local and remote alarm signaling, and authorized immediate exit. Its DIP-switch programming and external control inputs support integration with electromagnetic locks, access control systems, and emergency release equipment.

Securitron XDT-24 Modular Exit Delay Timer, 24 VDC, 3 SPDT Relays

The Securitron XDT-24 exit delay timer provides programmable delayed egress control for commercial access control systems equipped with fail-safe electric locking hardware. Designed for use in healthcare facilities, retail stores, institutional buildings, and other controlled-access environments, the timer coordinates door release, alarm notification, and system reset functions. Its field-selectable 15- or 30-second exit delay allows installers to configure the release sequence according to applicable building and life safety requirements. The XDT-24 integrates with compatible electromagnetic locks and switch-equipped initiating devices, including touch-sense exit bars and monitored panic hardware. The standard XDT-24 consists of the timer circuit board only, allowing installation within a suitable access control enclosure.

The XDT-24 operates on 24 VDC with a maximum current draw of 50 mA and requires a filtered or regulated DC power source. Its operating voltage tolerance is -10% to +20%, corresponding to 21.6-28.8 VDC. The controller incorporates three SPDT relay outputs rated at 5A each for local alarm signaling, remote alarm reporting, and electric lock control. DIP switches provide selectable nuisance delays of 0, 1, 2, or 3 seconds, along with 15- or 30-second total exit delay settings. The nuisance delay is included within the selected total release delay rather than added to it. Additional programming includes a 30-second BOCA relocking option. The manufacturer specifies an operating temperature range of 32 F to 110 F (0 C to 43 C).

The Securitron XDT-24 programmable delayed egress controller coordinates operation through dedicated initiating, reset, bypass, free-egress, lock-status, and delay-control connections. When a compatible normally closed initiating switch opens, the timer begins its programmed nuisance delay and activates a pulsing local alarm output. Once the nuisance period expires, the alarm changes to a steady signal and the release countdown continues until the electric lock is de-energized. Authorized bypass and free-egress inputs provide additional door control functions, while remote alarm contacts communicate delayed egress activity to compatible security monitoring equipment. External switches, including time clocks, allow the controller to operate in different modes when delayed egress is not required. Installation requires compatible fail-safe locking hardware, an initiating device, a separate audible sounder, and an appropriate reset arrangement.

The Securitron XDT-24 24V delayed exit timer forms part of the manufacturer's modular Exit Delay System, which combines electronic locking hardware, an exit initiation device, an alarm sounder, reset controls, and a suitable power supply. Securitron identifies the XDT series as ANSI/UL 294 listed and California State Fire Marshal (CSFM) approved, with the complete installation subject to applicable delayed egress regulations. The XDT-24 is supplied without an enclosure, sounder, or door label; the separately available BA-XDT-24 includes a surface-mounted enclosure with a piezo sounder and exit label, while the FA-XDT-24 provides a flush-mounted configuration. Manufacturer literature identifies MagnaCare lifetime replacement, no-fault warranty coverage. Installers must verify fire alarm interface requirements, permitted delay settings, manual reset provisions, and approval by the local Authority Having Jurisdiction (AHJ).



UPC: 784607024798
Also known as: SN-XDT24, HES-XDT24, XDT24

Technical Specifications:
  • Voltage: 12 VDC


For more information about the Securitron XDT-24, please contact us.
  • MagnaCare Lifetime Replacement No Fault Warranty
  • Three 5 Amp SPDT relays for interface capabilities
  • Nuisance delay and release times are digitally set using precise DIP switches
  • Meets all code requirements including the BOCA 30 second relock function
  • 24VDC operating voltage
  • External switches such as time clocks can put the XDT into different modes when delayed exit is not desired at all times

2 Reviews

  • 5
    SECURITRON-XDT-24

    Posted by 176434 on Oct 17th 2021

  • 5
    SECURITRON-XDT-24

    Posted by 131779 on Sep 12th 2018

Live Chat