Securitron MUNL-24 Grade 1 Mortise UnLatch Electric Strike

  • MPN: MUNL-24
  • JMAC ID: 200014443
$513.00
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200014443
df_manual_boost:
2.20

The Securitron MUNL-24 Mortise UnLatch is a 24 VDC motorized electric strike designed for commercial mortise locksets with latchbolts up to 3/4 inch. Featuring 1,500 pounds of static holding force, ANSI/BHMA A156.31 Grade 1 performance, and release under up to 15 pounds of door preload, it provides controlled entry while preserving deadlatch security. The strike features fail-secure operation, an integrated SPDT latch status monitor, and a 4-7/8-inch ANSI strike faceplate. Its concealed, non-handed design supports access control installations with minimal door-frame modifications.

Securitron MUNL-24 Mortise UnLatch 24V Motorized Electric Strike with Latch Monitoring

The Securitron MUNL-24 Mortise UnLatch Electric Strike provides motorized door release for commercial access control systems using compatible North American mortise locksets. Manufactured by Securitron, an ASSA ABLOY company, the MUNL-24 replaces a conventional ANSI strike plate with an electronically controlled mechanism that operates the mortise lock's springlatch and deadlatch without requiring the keeper to swing open. Its 1,500-pound static holding force and ability to release under up to 15 pounds of preload support secure entrances affected by moderate door pressure. Designed for commercial offices, healthcare facilities, educational institutions, retail storefronts, and other controlled-access environments, the strike accommodates mortise latchbolts with up to 3/4-inch projection and a 1/8-inch door gap. The MUNL-24 maintains the lockset's deadlatching function during normal secured operation and incorporates a factory-installed latch status sensor for integration with compatible security monitoring systems.

The Securitron MUNL-24 operates on 24 VDC power and uses a motor-driven mechanism rather than the solenoid-operated keeper found in conventional electric strikes. The motor retracts internal deadlatch fingers and advances a springlatch plunger to release the door when an authorized activation signal is received. This mechanism supports continuous-duty operation and fail-secure locking, allowing the door to remain electrically released for extended access periods while returning to its secured condition after the release signal ends and the door closes. The manufacturer's installation documentation identifies 40mA standby current, approximately 300mA during motor movement, and momentary startup current of up to 2A for approximately 100 milliseconds. Adequate power supply surge capacity is essential for dependable release under preload. An integrated motor protection circuit detects a stalled mechanism and automatically stops motor operation after approximately 1.5 seconds, protecting the internal components from prolonged overload conditions. The strike also incorporates a Form C SPDT latch status output rated at 1A at 30 VDC, allowing connected security equipment to distinguish a properly latched door from an unlatched condition while the strike remains powered.

The MUNL-24 Mortise Electric Strike features a 4-7/8-inch-high by 1-1/4-inch-wide ANSI strike faceplate and a compact mechanism requiring approximately 1-7/8 inches of installation depth. Its standard satin stainless steel US26D/626 finish provides compatibility with common commercial architectural hardware. The motorized strike installs into a conventional ANSI mortise strike preparation, typically eliminating the extensive frame cutting associated with traditional electric strikes. Its field-adjustable springlatch plunger and deadlatch fingers accommodate variations in latch and guard bolt positioning across compatible mortise locksets. Most North American mortise locks are supported, although Sargent 7800 and 8200 Series locks require the separately available STK-1 tab kit for applicable retrofit installations. The MUNL-24 uses a six-wire connection consisting of positive and negative power conductors, an activation trigger, and three latch status monitoring conductors. Compatible access control panels, keypads, card readers, and remote release switches can activate the motor through an appropriate switching interface. Installers must verify latch geometry, door alignment, available frame depth, and power supply capacity before installation.

The Securitron MUNL-24 is designed for high-security commercial access control installations requiring motorized release and monitored mortise latch engagement. It meets ANSI/BHMA A156.31 Grade 1 requirements and provides a published 1,500-pound static holding force. Manufacturer documentation identifies UL 10C three-hour fire-rated performance in fail-secure configurations, CAN/ULC-S104 fire door conformity, and ANSI/SDI A250.13 windstorm listing, subject to the approved door assembly and installation requirements. The strike operates within an ambient temperature range of -20 F to 125 F (-29 C to 52 C) and is backed by Securitron's SecuriCare five-year no-fault replacement warranty. The standard MUNL-24 remains locked during power loss, while the separately available FSUNL-24 module supports selectable fail-safe or fail-secure behavior when configured appropriately. Unlike the Securitron UNL-24, which is designed for cylindrical and tubular latchsets, the MUNL-24 is engineered for mortise locksets without an operational deadbolt. Its concealed construction, monitored latch status, preload release capability, and standard ANSI strike compatibility support new access control installations and retrofits requiring electrically controlled entry with continued mechanical egress through the compatible lockset.



UPC: 784607029632
Also known as: SN-MUNL24, HES-MUNL24, MUNL24

Technical Specifications:
  • Shipping Weight: 2 lbs. (0.91 kg)
  • Current Draw: 24VDC-40mA continuous, minimum 500mA when operating
  • Dimensions: 1-7/8" x 1-3/4" x 3-5/8" (48 mm x 32 mm x 92 mm)


For more information about the Securitron MUNL-24, please contact us.
  • Releases under preload
  • Fits standard ANSI 4-7/8" strike cutout
  • Motorized, no solenoids
  • Fully concealed installation
  • MagnaCare Lifetime Replacement No Fault Warranty
  • No cutting or altering of the jamb required
  • Maintains dead-latch function at all times
  • Continuous duty
  • Latch status sensor is standard
  • One model works with most North American Mortise Locks

2 Reviews

  • 5
    SECURITRON-MUNL-24

    Posted by 152921 on Feb 21st 2020

  • 5
    SECURITRON-MUNL-24

    Posted by 98732 on May 24th 2016

Live Chat