SDi Solo 200 Universal Fire Detector Removal Tool
-
MPN: SOLO200
-
JMAC ID: 200013809
The SDi Solo 200 (SOLO200) is a universal smoke and heat detector removal and installation tool designed to service ceiling-mounted fire detectors without requiring direct hand access. Its adjustable, color-coded, spring-loaded gripping heads accommodate compatible detectors measuring 2.5-4.5 inches (65-110 mm) in diameter. A pivoting head supports detector removal and replacement on flat or angled ceilings. Compatible with Solo 100, Solo 101, and Solo 108 access poles, the tool allows fire alarm technicians to reach elevated detectors for maintenance and replacement. The Solo 200 includes a limited lifetime manufacturer warranty.
SDi Solo 200 Universal Smoke and Heat Detector Removal Tool
The SDi Solo 200 Universal Detector Removal Tool provides a mechanical method for removing and installing compatible smoke and heat detectors mounted on ceilings and other elevated surfaces. Its adjustable three-point gripping mechanism accommodates detector housings from 2.5 to 4.5 inches (65-110 mm) in diameter, allowing technicians to engage and rotate detector heads without reaching them directly by hand. The tool is designed for detectors secured to compatible twist-lock mounting bases and supports routine fire alarm maintenance, detector replacement, and servicing in commercial buildings, schools, hospitals, warehouses, and industrial facilities.
The Solo 200 features three spring-loaded gripping heads with color-coded adjustment positions that rotate and lock into place to accommodate different detector diameters and housing profiles. Its adjustable gripping mechanism applies contact to the detector body, allowing technicians to rotate and disengage compatible units from their mounting bases. A pivoting head supports removal and installation at different working angles, including detectors installed on sloped ceilings or positioned away from the operator's direct vertical reach. The universal design accommodates a broad range of conventional and addressable smoke and heat detectors, although specialized detector housings and locking mechanisms can require manufacturer-specific removal tools.
The SDi Solo 200 connects to compatible Solo fiberglass access poles for detector maintenance at elevated mounting locations. The Solo 100 telescopic pole extends from approximately 4.8 to 14.9 feet and provides a working access height exceeding 20 feet. The Solo 108 extends from approximately 4 to 7.2 feet for lower ceilings, while the Solo 101 adds approximately 3.9 feet of extension to compatible pole configurations. These accessories allow technicians to adjust working height according to the installation without routinely using ladders or scaffolding. The Solo 200 removal head is supplied separately from the access poles, which must be selected according to the required working height and detector location.
The Solo 200 supports professional fire alarm inspection, detector replacement, and maintenance in facilities containing ceiling-mounted smoke and heat detection equipment. Its adjustable gripping system accommodates different detector models without requiring a dedicated removal head for every manufacturer, while the mechanical design requires no batteries, electrical connections, or consumable testing aerosols. The tool is intended for physical detector removal and installation rather than functional smoke or heat testing; compatible Solo smoke dispensers and heat testers perform those separate maintenance functions. SDi provides a limited lifetime manufacturer warranty for the Solo 200. Technicians must verify detector compatibility, release any locking mechanisms, and follow the detector manufacturer's removal and reinstallation procedures to avoid damaging the detector or mounting base.
UPC: 506018430031
Also known as: 2S-SOLO200
Technical Specifications:
|
For more information about the SDI SOLO200, please contact us.
1 Review
-
SDI-SOLO200