SDi Solo A10 Smoke Detector Testing Accessory
-
MPN: SOLOA10
-
JMAC ID: 202120026
The SDi Solo A10 (SOLOA10) is a 4.8 oz (150 mL) non-flammable aerosol smoke detector tester designed to verify the functional response of compatible smoke detectors. Its HFC-free, silicone-free, and low-residue formulation produces simulated smoke that activates the detector's sensing chamber without introducing combustion smoke. The aerosol provides up to 500 tests per can and supports direct handheld application or controlled delivery through Solo 330 and Solo 332 dispensers. UL/ULC certification and compatibility with leading detector manufacturers support professional fire alarm inspection and maintenance.
SDi Solo A10 4.8 oz Non-Flammable Aerosol Smoke Detector Tester
The SDi Solo A10 Smoke Detector Tester provides functional testing of smoke detection equipment by introducing simulated smoke particles into a detector's sensing chamber. The aerosol activates compatible smoke detectors to confirm their response to an airborne test stimulus during fire alarm inspection and maintenance. Its non-flammable, silicone-free formulation is designed to prevent harmful residue accumulation and reduce the risk of detector contamination. The Solo A10 supports testing of compatible photoelectric and ionization smoke detectors in commercial buildings, schools, hospitals, offices, and residential fire protection systems. Its rapid detector activation and clearing characteristics help technicians perform repeated functional tests without generating smoke through combustion.
The Solo A10 is supplied in a 4.8 oz (150 mL) pressurized aerosol can containing an HFC-free smoke simulation formula. The manufacturer specifies up to 500 functional tests per can, depending on spray duration, dispenser configuration, and detector response. Its non-flammable formulation uses an ozone-friendly propellant and contains no silicone, reducing the likelihood of residue buildup inside sensitive smoke detection chambers. The aerosol is UL/ULC certified and endorsed by leading smoke detector manufacturers for compatible testing applications. Unlike combustible smoke testing methods, the Solo A10 introduces a controlled aerosol stimulus without producing soot or combustion byproducts.
The SDi Solo A10 supports handheld application and use with compatible Solo 330 and Solo 332 aerosol dispensers. Direct application allows technicians to test accessible smoke detectors, while an enclosed dispenser directs the aerosol toward ceiling-mounted devices and helps limit overspray. The Solo 330 accommodates detectors up to approximately 4 inches in diameter, while the larger Solo 332 supports detectors up to approximately 7 inches in diameter. Both dispensers connect to compatible Solo telescopic access poles for testing smoke detectors installed above normal reach. The aerosol can is supplied separately from the dispensers and extension poles. Testing procedures must follow the detector manufacturer's instructions to ensure proper aerosol application and alarm response verification.
The SDi Solo A10 is designed for routine functional smoke detector testing during fire alarm inspections, scheduled maintenance, commissioning, and troubleshooting. Its silicone-free formulation and rapid clearing characteristics support repeated testing while minimizing contamination of detector components. The aerosol verifies a detector's response to simulated smoke but does not independently measure calibrated smoke sensitivity or confirm every connected fire alarm system function. The pressurized container must be protected from heat, direct sunlight, and ignition sources, and must not be exposed to temperatures exceeding 122 F (50 C). Although the finished aerosol is classified as non-flammable, proper storage, ventilation, and handling remain necessary. The SOLOA10 is supplied as an individual aerosol can, with cases of 12 available for larger maintenance operations.
UPC: 5060184301695
Also known as: 2S-SOLOA10
Technical Specifications:
|
For more information about the SDI SOLOA10, please contact us.
2 Reviews
-
SDI-SOLOA10
-
SDI-SOLOA10