Potter Amseco EVD-2C Electronic Vibration Detector with Remote Pickup, HSC-1 High Security Contact

The Potter Amseco EVD-2C, Electronic Vibration Detector System, is listed by Underwriters Laboratories, Inc. for primary protection of Mercantile or Bank, safe or vault, ATM machines and supplementary protection of interior units such as file cabinets, display cases, walls and ceilings. The System must be used with an appropriate UL listed control unit. The standard EVD-2C system consists of a model EVD-M controller, a model EVD-R remote pickup and an HSC-1 high security safe contact.

UPC: 785192008552
Also known as: PL-EVD2C, EVD2C

Technical Specifications: Dimensions: (EVD-M and EVD-R) 5.10"H x 3.26"W x 1.20"D (13.0cm H x 8.3cm W x 3.0cm D) Tamper Contact: Form A, 2.0 Amps at 30 VDC Contact Data: Alarm Relay: Form C, 2.0 Amps at 30 VDC Maximum Current: (Supply Voltage 16.0 VDC), Normal Standby Condition: 36 mA, Alarm Condition: 33 mA, Tamper Condition: 43 mA. With model RTA connected, add 14 mA in Tamper Condition and 14 mA in Alarm Condition. Typical Current: (Supply Voltage 12.0 VDC) Normal Standby Condition: 34 mA, Alarm Condition: 33 mA, Tamper Condition: 41 mA. Each additional EVD-R Remote Pickup adds (approx.) 3 mA. With model RTA connected, add 10 mA in Tamper Condition and 10 mA in Alarm Condition. auxillary power of a burglar panel, and the burglar panel has ground fault detection, it may be necessary to power the EVD from a separate UL listed 12 VDC power supply. Alternately, the safe may be insulated from ground. Maximum 0.1 V ripple NOTE: If the EVD is going to be powered by the Power Input: 9.0 VDC to 16.0 VDC, 12 VDC Nominal Enclosure: Base: Die-cast aluminum, Cover: Stamped Steel, 22 Gauge Weight: EVD-M 0.64 lbs. (0,29 kg), EVD-R 0.62 lbs. (0,28 kg)

For more information about the Potter / Amseco EVD-2C, please contact us.