Potter Amseco SH-24HW High Intensity Horn Strobe, White, Canadian
Also known as: SH24HW, PL-SH24HW
The SH-24H Select-A-Strobe/Horn Series provides a wide range of candela light output options in a single device. The candela settings include a 24 volt DC operation for the 95, 110, 135, 150, 177 or 185 setting. The candela setting is displayed through the front window and is selectable using a drum wheel.
The horn settings include Temporal, Non-Temporal, March Time and a Chime sound. The horn also has Low, Mid and High volume settings for each pattern and tone. The tones include 2400 Hz, Electro-Mechanical, Broadband and Chime.
The voltage input can be either regulated DC or full wave rectified (FWR) 24 volt operation with an operating range from 16 to 33 VDC. The strobes can be synchronized using a control panel with the Potter (Amseco) sync protocol or a SMD10-3A sync module.
The SH-24H utilizes a universal mounting plate that will mount on a single gang, double gang, octagon and 4 square electrical boxes. The back plate allows the installer to mount the plate and connect the wire connections. The strobe attaches in a hinge fashion from the top and is secured by a single mounting screw. The strobe completely covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the final look.
- Color: White
- UL and cUL listed
- 24 VDC with 95, 110, 135, 150, 177 or 185 cd settings
- 6 distinct candela settings
- Candela selection view window
- 33 sound output settings
- Horn or chime sound output
- Pre-wire back plate
- Universal back plate mounting (single gang, double gang, octagon, or 4 square)
- Single screw mounting
- Wall mount
- Indoor only
- Low current draw