Keyscan WSSKP-1 Stainless Steel Keypad

• Fast, easy, trouble-free installation
• Extends standard cable distance to 4000 ft. (1220m) for greater installation flexibility
• Proprietary RS485 communications between the WIEEX Transmitter and WIEEX Receiver
• Simplifies your installations since the Wiegand Extender fully supports activity at one door without additional wiring expense (Wiegand compatible reader, unlock relay, door contact and request to exit)
• WIEEX2 can be installed inside the ACU and use the battery backed up power supply to simplify installation and further reduce costs
• On-board communications fail output can be connected to an input on the ACU to generate an alarm if the transmitter fails to communicate with the receiver
• Reduces the installation cost by reducing the number of wire runs, wire count and associated costs
• Converts Wiegand to RS-485 Then to Wiegand
• 2 Modules Included 1 for Reader and 1 for ACU
• Supports Present3 Feature
• Now Supports 26 Bit to 80 Bit Wiegand
• Supports Baud Rates of 19,200 and 9600 Baud
• Stand alone access control or part of a complete access control system.
• Suitable as replacement "reader" for any 26 bit or Keyscan 36 bit Wiegand reader.
• Brushed Stainless Steel keypad for durability that matches almost any decor.
• Braille keys for visually impaired requirements.
• Suitable for most exterior or interior applications.
• Simple to use commands allow maximum flexibility.
• Fast, easy, trouble-free installation.
• Simple programming permits use in many different types of installations from single door (low and moderate security) to sophisticated CCTV and access control systems whether it is a retrofit application or a new installation.
• Since the WSSKP1 supports industry standard 26 bit Wiegand data or proprietary KEYSCAN 36 bit format, it can be used with either a KEYSCAN ACU or with alternate control units supporting standard 26 bit data.
• Three digit facility codes can easily be activated for installations using site or facility codes from 001 to 255.
• Braille keypad permits use in premises that are accessible to visually impaired.
• In stand alone applications, PIN's can be set up to be either 3, 4 or 5 digits to suit the customer's security requirements.
• Any single PIN can be changed OR all PIN's can be eliminated with simple keypad command sequences for stand alone applications.
• Can be programmed to trigger a CCTV input prior to the host unlocking the controlled entry point.
• As many as 28 distinct PIN codes can be programmed into the WSSKP1 for stand alone operation.

• Product Type: Keypad Access Device
• Number of Users: 28
• Identification Method: Key Code
• Depth: 0.7"
• Width (mm): 75
• Width: 3"
• Input Voltage (V DC): 12
• Operating Range: 500 ft
• Color: Brushed Stainless Steel
• Input Voltage: 12 V DC
• Operating Range (mm): 152400
• Depth (mm): 18
• Compatibility: Keyscan Access Control System
• Form Factor: Standalone, Wall Mountable
• Wiegand: Yes
• Application/Usage: Indoor, Outdoor
• Height (mm): 114
• Height: 4.5"