516-812-0917
Help
Live Chat
Gentex WGEC24-75PWR Outdoor Wall Mount Evacuation Signal (Red)
-
MPN: WGEC24-75PWR
-
JMAC ID: 200088457
The Gentex WGEC24-75PWR is a 24V evacuation outdoor horn/strobe designed for wall mounting with a plain red faceplate.
The Outdoor Commander Series offers dependable visible and/or audible alarms for all outdoor needs. Included with the WGE Series is the GOE or GOELP outdoor enclosure. Theenclosure is made of high quality Lexan material, providing protection from weather related conditions and allowing the necessary full candela output. This highly constructed enclosure meets various installation requirements including deterring moisture from entering the enclosures.
The Outdoor Commander Series is equipped with the 4 mounting plate which incorporates the Super-Slide feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.
The WGE Series also features the Checkmate - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to ten blueprint.
The WGE Series strobe has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.
The WGE Series appliances are ANSI/UL 464 and ANSI/UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.
UPC: 700217018750
Also known as: GN-9041245, WGEC2475PWR
For more information about the Gentex WGEC24-75PWR, please contact us.
The Outdoor Commander Series offers dependable visible and/or audible alarms for all outdoor needs. Included with the WGE Series is the GOE or GOELP outdoor enclosure. Theenclosure is made of high quality Lexan material, providing protection from weather related conditions and allowing the necessary full candela output. This highly constructed enclosure meets various installation requirements including deterring moisture from entering the enclosures.
The Outdoor Commander Series is equipped with the 4 mounting plate which incorporates the Super-Slide feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.
The WGE Series also features the Checkmate - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to ten blueprint.
The WGE Series strobe has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.
The WGE Series appliances are ANSI/UL 464 and ANSI/UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.
UPC: 700217018750
Also known as: GN-9041245, WGEC2475PWR
For more information about the Gentex WGEC24-75PWR, please contact us.
- Tamperproof re-entrant grill
- Super-Slide® - Ease ofSupervisionTesting
- GOE Unit Dimensions: 5.75”(14.605 cm) high x 4.75”(12.065 cm) wide x 4.18”(10.617 cm) deep GOELP Unit Dimensions: 5.75”(14.605 cm) high x 4.75”(12.065 cm) wide x 3.25”(8.255 cm) deep
- To obtain outdoor listed horn, must order GEH24 and GOE/GOELP separately
- Switch for continuous tone or temporal 3 (not available on whoop tone)
- Switch for mechanical and 2400Hz tone
- Switch selection for high or low dBA
- Unit is shipped withANSI/UL1638 listed WGES24-75 candela strobe or WGEC24-75 candela horn/strobe
- Checkmate® - InstantVoltageVerification
- Nominal voltage 24VDC
- Faceplate available in red or off-white
- Input terminals accept 12 to 18AWG
- GOE/GOELP made of clear Lexan® - provides maximum visibility and reliability for effective visible signaling - allowing full 75cd output
- Listed toANSI/UL1638 when used with the GOE or GOELP enclosure
- Synchronize strobe and/or horn by using GentexAVSM Control Module
- Separate horn and strobe functions
- Prewire entire system, install mounting bracket, then install signals
Other products from Gentex
Customer Reviews
2 Reviews
-
GENTEX-WGEC24-75PWR
-
GENTEX-WGEC24-75PWR
