Adams Rite 7101-540-628-00 Electric Strike 24VAC Fail Secure in Clear
-
MPN: 7101-540-628-00
-
JMAC ID: 200102327
The Adams Rite 7101-540-628-00 Electric Strikes with a 4-7/8 faceplate are designed for Adams Rite deadlatches or cylindrical locksets with to 5/8 latchbolt projection. For use in aluminum jambs and stiles.
The strike has a radius model faceplate, operates on 24 VAC and has a clear anodized finish.
The 7101 series Electric Strike with 4-7/8" faceplates provides remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2" to 5/8" latchbolt projection. Here, the electrical actuation unlocks strike jaw and releases latchbolt so that the door can be opened. It readily fits the setup for the 7000, 7500, and 7800 series Adams Rite electric strikes that are no longer manufactured.
UPC: 888512102753
Also known as: R8-710154062, 710154062800
For more information about the Adams Rite 7101-540-628-00, please contact us.
The strike has a radius model faceplate, operates on 24 VAC and has a clear anodized finish.
The 7101 series Electric Strike with 4-7/8" faceplates provides remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2" to 5/8" latchbolt projection. Here, the electrical actuation unlocks strike jaw and releases latchbolt so that the door can be opened. It readily fits the setup for the 7000, 7500, and 7800 series Adams Rite electric strikes that are no longer manufactured.
UPC: 888512102753
Also known as: R8-710154062, 710154062800
Technical Specifications:
|
For more information about the Adams Rite 7101-540-628-00, please contact us.
- Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either
- Bolt retainer jaw is stainless steel
- Has lip of proper length for 1-3/4” thick door that closes flush with jamb edge
- Approximately 1” x 3-3/8” x 1-5/8” deep. Zinc aluminum alloy
2 Reviews
-
ADAMS-RITE-7101-540-628-00
-
ADAMS-RITE-7101-540-628-00