Adams Rite 31-0833-IP Dual Coil Solenoid Assembly Exit Device For 8000 Series Exit Device

  • MPN: 31-0833-IP
  • JMAC ID: 200246438
$174.00
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200246438
df_manual_boost:
2.20

The Adams Rite 31-0833-IP is a dual-coil replacement solenoid assembly designed for the electric latch retraction mechanisms of compatible Adams Rite 3000 and 8000 Series exit devices. Used in surface vertical rod, concealed vertical rod, mortise, and inset exit hardware, the solenoid provides the electromagnetic actuation needed to retract the exit device's latching mechanism when commanded by the associated electrical control system. It is a service replacement component for restoring electric latch retraction functionality without replacing the complete exit device.

Adams Rite 31-0833-IP Dual-Coil Solenoid Assembly for Electric Latch Retraction Exit Devices

The Adams Rite 31-0833-IP Dual-Coil Solenoid Assembly is a replacement electrical component designed for compatible Adams Rite exit devices equipped with an electric latch retraction (LR) mechanism. Manufactured by Adams Rite, an ASSA ABLOY brand, the 31-0833-IP provides the electromagnetic actuation used to retract the latching mechanism of supported 3000 Series and 8000 Series exit devices. The assembly is intended for servicing existing electrified panic hardware and exit devices where the original solenoid has failed, become damaged, or requires replacement during equipment maintenance. Its dual-coil construction works with the associated latch retraction driver electronics to produce the mechanical movement required for electrically controlled unlocking. The 31-0833-IP is suitable for commercial entrances, institutional facilities, industrial buildings, and access-controlled openings equipped with compatible Adams Rite electric latch retraction hardware.

The 31-0833-IP incorporates a dual-coil electromagnetic actuator designed to operate with the electrical control circuitry used in Adams Rite latch retraction systems. The manufacturer's replacement parts documentation identifies the 31-0117-IP two-wire driver board and 31-0114 wire harness as associated components within the supported electric latch retraction assembly. The dual-coil arrangement provides the electromagnetic force required to retract the connected latch mechanism when the system receives the appropriate activation signal. Adams Rite's PS-LR power supply documentation identifies diagnostic readings of approximately 44 ohms and 28.5 VDC across the black and white conductors, along with approximately 2 ohms and 0.6 VDC across the black and red conductors, when measured under the specified powered operating conditions through the driver circuitry. These values are diagnostic references for the supported system rather than standalone power supply specifications. Correct operation depends on the compatible driver, wiring harness, power supply, and mechanical latch retraction assembly.

The Adams Rite 31-0833-IP supports multiple electric latch retraction exit device configurations, including the 3100LR, 8100L, and R8200LR surface vertical rod devices; 3300LR, 8300LR, and 8400LR mortise devices; 3600LR, 3900LR, 8500LR, 8600LR, and 8900LR concealed vertical rod devices; and 3375LR and 3676LR inset devices. These applications are identified in the manufacturer's replacement parts documentation for the 3000EL and 8000EL exit device families. The solenoid is installed within the existing exit device operating assembly and must be mechanically secured and electrically connected according to the appropriate device configuration. Installation may require removal of the exit device push bar or access to its internal operating mechanism. The replacement assembly must be correctly positioned to engage the latch retraction linkage without interfering with normal mechanical operation. Installers should inspect the associated driver board, wire harness, mounting hardware, and latch mechanism when replacing the solenoid to identify any additional components requiring service.

The 31-0833-IP is intended for maintenance and repair of existing Adams Rite electrically operated exit hardware rather than standalone electronic locking applications. When installed in a compatible system, the solenoid supports remotely commanded latch retraction through the exit device's designated power supply and driver electronics, enabling integration with approved access control equipment and automatic door operators. It is distinct from the Adams Rite 31-0735-IP and 31-0736-IP single-solenoid replacement assemblies, which are identified for different rim exit device configurations and must not be assumed interchangeable with the 31-0833-IP. The 31-0833-IP is supplied as a replacement solenoid assembly rather than a complete exit device, power supply, or latch retraction conversion kit. For repair projects, technicians should confirm the existing exit device model, electric latch retraction configuration, solenoid identification, driver board compatibility, and applicable installation documentation before replacement. Maintaining the proper electrical and mechanical components helps restore the designed latch retraction function while preserving the operation of the existing exit hardware. Any applicable fire-rated or panic hardware listing must be maintained through manufacturer-approved replacement parts and installation practices.



UPC: 999999359406
Also known as: R8-310833IP, 310833IP

Technical Specifications:
  • Product Type: Dual Coil Solenoid
  • Device Supported: Electric Strike
  • Series: Adams Rite Parts
  • Compatibility: Adams Rite 8000 Series Electric Strike


For more information about the Adams Rite 31-0833-IP, please contact us.
  • Dual Coil Solenoid Assembly

1 Review

  • 5
    ADAMS-RITE-31-0833-IP

    Posted by 62390 on Nov 2nd 2013

Live Chat