Adams Rite 7100-510-313-00 24V Electric Strike Bronze
-
MPN: 7100-510-313-00
-
JMAC ID: 200246717
The Adams Rite 7100-510-313-00 is a 24VDC fail-secure electric strike designed for remote access control of doors equipped with Adams Rite deadlatches or compatible cylindrical locksets. Featuring a 1-1/4" x 4-7/8" flat faceplate with a dark bronze anodized finish, it accommodates latchbolt projections from 1/2" to 5/8". The strike provides quiet DC operation, field-selectable fail-safe or fail-secure functionality, and compatibility with aluminum, hollow metal, and wood door frames.
Adams Rite 7100-510-313-00 24VDC Fail-Secure Electric Strike, Dark Bronze
The Adams Rite 7100-510-313-00 Electric Strike provides electrically controlled door release for commercial access control systems using Adams Rite deadlatches or compatible cylindrical locksets. Designed for aluminum storefront entrances, narrow-stile doors, hollow metal frames, and wood door applications, this 7100 Series strike allows authorized users to open a door without mechanically retracting the latchbolt. When energized, the electric strike releases its keeper, permitting the latchbolt to pass through the opening. The unit features a 24VDC operating voltage, standard fail-secure configuration, and 313 dark bronze anodized finish, combining electronic access control with architectural door hardware.
The 7100-510-313-00 incorporates a 1-1/4" wide x 4-7/8" high flat faceplate with radius corners and a compact strike case measuring 1" wide x 3-3/8" high x 1-5/8" deep. Its stainless steel bolt-retaining keeper accommodates 1/2" to 5/8" latchbolt projections, supporting Adams Rite 4500, discontinued 4700, and 4900 Series deadlatches, along with compatible cylindrical locks. The strike operates at 24VDC with a nominal current draw of 0.17A (170mA) and supports continuous-duty DC operation without the buzzing associated with intermittent AC strikes. The 7100 Series is UL 1034 burglary-resistant listed and UL 294 listed for applicable security and access control installations.
The fail-secure operating configuration keeps the strike locked when electrical power is removed, maintaining the secured condition of the door until an authorized mechanical release is performed. Installers can convert the strike to fail-safe operation in the field when the application requires the keeper to release upon power loss. The non-handed design accommodates left-hand and right-hand door installations by reversing the strike orientation. Its standard 00 lip configuration accommodates door centerline-to-jamb-edge dimensions up to 1-1/16", while separately available lip extension kits support installations requiring additional clearance. The dark bronze anodized faceplate provides a coordinated appearance with compatible storefront framing and architectural hardware.
The Adams Rite 7100-510-313-00 is suitable for electronically controlled entrances in retail storefronts, offices, commercial facilities, and secured interior access points. Installation hardware includes mounting screws, mounting clips, and adhesive shims for accommodating differences in jamb or stile extrusion thickness from the nominal 1/8" dimension. The strike can be connected to a compatible 24VDC access control power supply and controlled through an access control relay, keypad, card reader system, or approved release device. Its 4-7/8" faceplate and compact strike body support integration into compatible prepared frames without replacing the existing mechanical deadlatch. Installers should verify latchbolt alignment, frame preparation, power supply capacity, and applicable egress requirements before installation.
UPC: 999999113006
Also known as: R8-710051031, 710051031300
Technical Specifications:
|
For more information about the Adams Rite 7100-510-313-00, please contact us.
- Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either
- Bolt retainer jaw is stainless steel
- Has lip of proper length for 1-3/4” thick door that closes flush with jamb edge
- Approximately 1” x 3-3/8” x 1-5/8” deep. Zinc aluminum alloy
2 Reviews
-
ADAMS-RITE-7100-510-313-00
-
ADAMS-RITE-7100-510-313-00