Adams Rite 7140-310-628-00 Electric Strike, 12VDC, Fail-Secure, Clear Anodized, Up to 1-1/16" Lip Extension
-
MPN: 7140-310-628-00
-
JMAC ID: 200246787
The Adams Rite 7140-310-628-00 is a 12 VDC fail-secure electric strike designed for Adams Rite 4500, 4700, and 4900 Series deadlatches and compatible cylindrical locksets. Featuring a clear anodized aluminum finish (628), 4-7/8-inch flat faceplate, and standard 1-1/16-inch strike lip, it accommodates latchbolts with 1/2-inch to 5/8-inch projection. The compact strike draws 330 mA at 12 VDC and supports continuous or intermittent operation. Its field-convertible fail-secure/fail-safe mechanism provides controlled entry through compatible access control systems.
Adams Rite 7140-310-628-00 Electric Strike, 12 VDC, Fail-Secure, Clear Anodized
The Adams Rite 7140-310-628-00 Electric Strike provides electronic door release for commercial entrances equipped with compatible Adams Rite deadlatches or cylindrical locking hardware. Part of the Adams Rite 7100 Series, this compact electric strike features a 12 VDC continuous-duty solenoid, field-convertible fail-secure mechanism, and 628 clear anodized aluminum finish. It is designed for use with Adams Rite 4500, 4700, and 4900 Series deadlatches and compatible cylindrical locks featuring 1/2-inch to 5/8-inch latchbolt projection. When activated by an access control system, the strike releases its retaining jaw, allowing the door to open without retracting the existing latchbolt. The 7140 is suitable for aluminum storefront entrances, hollow metal door frames, wood jambs, commercial offices, retail buildings, and institutional access-controlled doors.
The 7140-310-628-00 operates at 12 VDC with a current draw of 0.33 amperes (330 mA), supporting continuous or intermittent duty when powered by a properly rated DC supply. The strike is supplied in a fail-secure configuration, meaning the keeper remains locked when electrical power is removed and releases when energized. Its mechanism can be field-converted to fail-safe operation when required by the approved door configuration. The 7140 Series provides a manufacturer-rated 1,500-pound static strength, 70 ft-lb dynamic strength, and 250,000-cycle endurance. The strike incorporates a stainless steel bolt-retaining keeper and compact zinc-aluminum alloy case. Electrical activation can be controlled through compatible access control relays, card readers, keypads, intercom systems, or other appropriately rated switching devices.
The Adams Rite 7140-310-628-00 features a 4-7/8-inch-high by 1-1/4-inch-wide flat aluminum faceplate with a clear anodized finish corresponding to ANSI/BHMA 628 (US28). Its compact case measures approximately 1 inch wide, 3-3/8 inches high, and 1-5/8 inches deep, allowing installation in compatible narrow door jamb sections. The strike opening measures 5/8 inch by 1-7/16 inches with a 1/2-inch depth, accommodating supported latchbolt geometries. The standard -00 lip configuration is designed for applications where the distance from the door centerline to the jamb edge is 1-1/16 inches or less. Additional 7140 Series lip extension configurations are available for installations requiring greater clearance. Its non-handed construction supports compatible left-hand and right-hand door arrangements.
The 7140-310-628-00 is supplied with mounting screws, mounting clips, and adhesive shims to support installation in appropriately prepared aluminum, hollow metal, or wood door frames. The shims allow installers to align the strike faceplate with the jamb, while the mounting clips accommodate installations without welded mounting tabs. The compact design also supports replacement of certain discontinued Adams Rite 7040, 7840N, and 7850 electric strikes, subject to existing frame preparation and compatibility verification. Manufacturer documentation identifies UL 1034 burglary-resistant and UL 294 access control equipment listings for the 7140 Series. The strike is intended for electrically controlled entry and does not independently provide an access control reader, power supply, or complete locking system. Installation must follow Adams Rite's current wiring instructions, applicable door hardware requirements, and local building and emergency egress codes.
UPC: 888512103224
Also known as: R8-714031062, HES-714031062800, 714031062800
Technical Specifications:
|
For more information about the Adams Rite 7140-310-628-00, please contact us.
- Operates at 12VDC
- 1-1/16" or less lip extension
- Clearn anodized finish
- Fail-secure operation
1 Review
-
ADAMS-RITE-7140-310-628-00