516-812-0917
Help
Live Chat
Expedited Shipping Available
The HES 610 is a compact electromechanical cabinet lock that brings access control to furniture: filing cabinets, fitted cupboards, drawers, safe-deposit boxes, and glass display cases. It delivers over 200 lbs of holding force from a small surface-mounted body, securing swinging or sliding doors and drawers where a full-size lock will not fit.
The lock is a two-part design - a locking element mounted inside the cabinet and a rosette on the door or drawer, engaging from the front or the top. Operating mode is set during installation simply by orienting the rosette: fail-secure (locked on power loss) or fail-safe (unlocked on power loss). An integrated retention mechanism keeps the door closed even while unlocked, so no separate magnetic snap is needed.
Wired to a key switch, keypad, or card reader system, the 610 runs on stabilized 12 or 24 VDC for continuous duty with low current draw. The 610LM model adds a locked state monitoring contact (SPDT, rated 25 V / 1 A) for audit and remote status in access control systems.
Features
- Over 200 lbs of holding force in a compact cabinet-lock format.
- Secures swinging doors, sliding doors, and drawers in wood or glass cabinetry.
- Field selectable fail-secure or fail-safe - set by orienting the rosette at installation.
- Integrated retention keeps the door closed even when unlocked; no magnetic snap required.
- Surface mounts with minimal tools; rosette engages from the front or the top.
- Mounting hardware included: screws, washers, reducing bushes for existing bore holes, and an adhesive positioning film.
- Stabilized 12 or 24 VDC operation for continuous duty with low current draw.
- Optional 610LM locked state monitoring contact (SPDT, 25 V / 1 A) for audit trails.
- Integrates with key switches, keypads, and card reader access control systems.
- Discreet black housing suits retail, office, healthcare, and pharmacy cabinetry.
Specifications
General
- Function
- Electromechanical cabinet lock, two-part (locking element + rosette)
- Holding Force
- 200+ lbs static
- Applications
- Filing cabinets, cupboards, drawers, safe-deposit boxes, glass display cases; swinging or sliding doors and drawers
- Mounting
- Surface mount; rosette engagement from front or top; hardware and adhesive positioning film included
- Door Retention
- Integrated mechanism holds the door closed while unlocked
- Dimensions
- Locking element 48 x 42 x 20 mm (without rosette)
- Operating Temperature
- 50 F to 104 F (10 C to 40 C)
- Finish
- Black
- Warranty
- 3 year no-fault
- Ordering
- 610 (no monitoring) or 610LM (locked state monitoring)
Electrical
- Voltage
- 12 or 24 VDC stabilized (plus or minus 10%), continuous duty; AC operation possible but not recommended (audible buzz)
- Current Draw
- 260 mA @ 12 VDC; 130 mA @ 24 VDC
- Monitoring Contact (610LM)
- Change-over (SPDT), rated 25 V / 1 A
- Wiring Note
- Recovery diode (included) connects in parallel to the coil on DC supplies
Frequently Asked Questions
- What can the 610 secure?
- Furniture-scale openings: filing cabinets, fitted cupboards, drawers, safe-deposit boxes, and glass display cases - swinging or sliding.
- How do I set fail-safe or fail-secure?
- During installation, orient the rosette so the mark on the locking element points to the desired mode pictogram. Fail-secure stays locked on power loss.
- Does the door swing open when unlocked?
- No - an integrated retention mechanism keeps the door closed until pulled, so no separate magnetic snap is needed.
- What power does it require?
- Stabilized 12 or 24 VDC for continuous duty (260 mA / 130 mA). AC can unlock it but causes an audible buzz and is not recommended.
- Can it report status to my access control system?
- Yes - the 610LM model includes a locked state monitoring contact (SPDT, rated 25 V / 1 A).
- How does it connect to access control?
- It wires to a key switch for simple control, or to keypad and card reader systems for controlled, logged access.
