516-812-0917
Help
Live Chat
The HES 9200 Series is a low-profile, surface mounted electric strike for pairs of frameless glass doors with tubular vertical rod exit devices. One unit secures the pair: it retro-mounts using the existing header prep with no cutting required, and integrated adjustability positions each keeper to its latch - preserving the clean look of an all-glass entrance on storefronts, lobbies, and commercial pairs.
The 9200 exceeds ANSI/BHMA A156.31 Grade 1 standards with 1,500 lbs of static strength, 70 ft-lbs of dynamic impact resistance, and 1,000,000 tested cycles, in quiet-operating stainless steel construction rated for outdoor use (UL 1034). Adaptable voltage sensing runs the strike anywhere from 12 to 24 volts with no wiring selection (480 mA @ 12 VDC, 240 mA @ 24 VDC, PoE friendly), and operation is field selectable between fail-secure and fail-safe.
Order by keeper spacing - N narrow (4-5/8" centerline to centerline) or W wide (8-3/8") - with seven architectural finishes and factory or field installable monitoring: LM latchbolt monitor or LMS latchbolt and strike monitor (for example 9200W-630-LM). Compatible with roller latches from CRL, FHC, PRL, and dormakaba and the Rockwood PDU security latch, and backed by the SecuriCare 5 year no-fault warranty.
Features
- Secures pairs of glass doors with tubular vertical rod exit devices in one unit.
- Retro-mounts on the existing header prep - no cutting required.
- Integrated adjustability for optimal latch positioning at each keeper.
- Exceeds Grade 1: 1,500 lbs static strength, 70 ft-lbs dynamic impact.
- Endurance tested to 1,000,000 cycles; quiet operation.
- Adaptable voltage sensing runs on 12 through 24 volts with no wiring selection.
- Field selectable fail-secure or fail-safe operation.
- Stainless steel construction, rated for outdoor use (UL 1034); PoE friendly.
- Two keeper spacings: N 4-5/8" or W 8-3/8" centerline to centerline.
- Factory configured or field installable LM / LMS monitoring.
- Slim 13" x 1-7/8" x 5/8" profile in seven architectural finishes.
- SecuriCare 5 year no-fault warranty.
Specifications
General
- Function
- Surface mounted electric strike for tubular vertical rod exit devices, pairs of glass doors
- Installation
- Retro-mount on existing header prep; no frame cutting
- Keeper Spacing
- N narrow 4-5/8" (117.5 mm) or W wide 8-3/8" (212.7 mm), centerline to centerline
- Holding Strength
- 1,500 lbs static; 70 ft-lbs dynamic impact (exceeds Grade 1)
- Cycle Endurance
- 1,000,000 tested cycles
- Material
- Stainless steel; quiet operation
- Dimensions
- 13" long x 1-7/8" tall x 5/8" thick
- Frame Types
- Aluminum or hollow metal; wood with additional mounting hardware
- Operating Mode
- Field selectable fail-secure or fail-safe
- Environment
- Suitable for outdoor use (UL 1034)
- Warranty
- SecuriCare 5 year no-fault
- Ordering
- Keeper spacing + finish + monitoring option (e.g. 9200W-630-LM)
Electrical
- Voltage
- Adaptable voltage sensing, 12-24 VDC/VAC; no wiring selection required
- Current Draw
- 480 mA @ 12 VDC; 240 mA @ 24 VDC
- Monitoring
- LM latchbolt monitor or LMS latchbolt and strike monitor; factory configured or field installable
Compatible Latches
- Roller Latch
- CRL PA Series, FHC HP Series, PRL PL Series, dormakaba GP Series
- Security Latch
- Rockwood PDU Series
Finishes
- 630
- Satin Stainless Steel
- 629
- Bright Stainless Steel
- 605
- Bright Brass
- 606
- Satin Brass
- 612
- Satin Bronze
- 613E
- Dark Oxidized Satin Bronze, Powder Coat
- BSP
- Black Suede Powder Coat
Certifications and Compliance
- ANSI/BHMA A156.31
- Grade 1
- UL 1034
- Burglary-resistant listed, suitable for outdoor use
- UL 294
- Access control system units
- UL 305
- Panic hardware listed
- RoHS
- Compliant
Frequently Asked Questions
- What openings is the 9200 designed for?
- Pairs of frameless glass doors with tubular vertical rod exit devices - one strike unit secures both leaves at the header.
- How do I choose narrow or wide?
- Match the keeper spacing to the exit device latches: N = 4-5/8" and W = 8-3/8", measured centerline to centerline.
- Which exit device latches does it work with?
- Roller latches from the CRL PA, FHC HP, PRL PL, and dormakaba GP series, and the Rockwood PDU security latch.
- Does installation require cutting the frame?
- No - it retro-mounts using the existing header prep.
- What power does it require?
- Anything from 12 to 24 volts - adaptable voltage sensing needs no wiring selection. Draw is 480 mA @ 12 VDC or 240 mA @ 24 VDC, PoE friendly.
- Can it report door status?
- Yes - order with LM or LMS monitoring, factory configured or field installable.
- Can it be installed outdoors?
- Yes - UL 1034 listed and suitable for outdoor use.
- What about single glass doors?
- Use the companion HES 9100 Series, the single-door version of this strike.
