Viking-E-70-BK-EWP Entry Phone with built-in Proximity Card Reader and Enhanced Weather Protection

The E-70 Series entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree audio communication. The E-70 also includes a built-in 125KHz proximity card reader that supports Viking PRX-C, PRX-C-ISO, PRX-FOB and certain legacy HID proximity protocols. The card reader outputs industry standard 26-bit Wiegand data, allowing it to be used with a Viking ES-1 door controller or any controller compatible with 26-bit Wiegand format.

The E-70's compact size allows it to be mounted in a standard double gang electrical box. The E-70 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-70 faceplates (PNL70) can be purchased separately and are available in all five standard finishes.

The E-70 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller. The E-70 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer.

The E-70 features a built-in proximity card reader, microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. For outdoor installations where the unit is exposed to precipitation or condensation, the E-70 Series is available with Enhanced Weather Protection (EWP). For more information on EWP, see DOD# 859.

UPC: 615687224153
Also known as: VK-E70BKEWP, E70BKEWP

Technical Specifications: Operating Temperature: -34C to 65C (-30F to 150F) Humidity: Up to 100% (fully potted EWP) LED: Red, turns off during card read Transducer: Beeps during card read Technologies Supported: Viking PRX-C, PRX-C-ISO, PRX-FOB and certain legacy HID proximity protocols* Read Range: 1.25 to 2.0 Format: 26 bit Wiegand Frequency: 125KHz Maximum Cable Length: 500 ft 24 Awg stranded shielded (Belden 9537) Power: 5 to 14V DC @ 60mA maximum Proximity Card Reader Specifications Recommended Surface Mount Box: Viking model VE-5x5 (DOD# 424) Recommended Electrical Box for Flush Mounting: Double gang with minimum inside dimensions of 2.25 deep x 3.65 wide x 2.84 tall (Carlon BH234R or equivalent) Connections: (5) gel-filled butt connectors (3M Scotchlok UR2) Humidity: Standard model: 5% to 95% non-condensing, EWP model: Up to 100% Operating Temperature: -34 C to 65 C (-30 F to 150 F) REN: 0.8A CPC Disconnect Time: 300ms minimum Ring Voltage: 25V AC RMS minimum (for auto answer) Speaker Volume: Approximately 62db maximum @ 1m Shipping Weight: 0.55 kg (1.2 lbs) Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875 x 4.938 x 0.17), Phone: 72mm x 46mm x 42mm (2.84 x 1.8 x 1.65) Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1B Talk Battery Booster (see DOD# 632). Entry Phone Specifications

For more information about the Viking Electronics E-70-BK-EWP, please contact us.