Viking K202DVA Two-Input Voice Alarm Dialer

MPN: K202DVA
JMAC ID: 200015058

$194.33

In Stock

Expedited Shipping Available
Need it Tomorrow?

Need it Tomorrow?

Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.

JMAC_ID:: 200015058
df_manual_boost:: 1.90

Product Resources

K202DVA Data Sheet

We're here to help

Request a Quote

Low Price Guarantee

Vikings K202DVA is a fully programmable two-input, multi-number auto dialer, designed for emergency and non-emergency message notification. The K202DVA has two dry contact inputs, each of which can dial up to seven 32-digit phone numbers and play a message up to 1 minute in length specific to that input.

Messages can be recorded locally or remotely with a total message time for both inputs of two minutes. The K202DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection. Programming is easily done with a Touch Tone phone.

UPC: 615687223231
Also known as: VK-K202DVA

Technical Specifications:

Connections: (1) RJ11 jack for telco connection, (1) 4 position screw terminal block for inputs
Resolution Resume Timer: 1 second to 18 hours
Resolution Qualifier Timer: 1 second to 18 hours
Input Detection Time: 80 ms with Qualifier Timer set to 0
Sampling Rate: 64 K (equivalent)
Message Record Time: 2 minutes
CPC Detection Time: 320 ms minimum
Touch Tone Dialing: 120 ms on/off, 50 ms on/off
Talk Battery: 12V DC
Environmental: 0C to 32C (32F to 90F) with 5% to 95% noncondensing humidity
Shipping Weight: 0.68 Kg (1.5 lbs)
Dimensions: 133mm x 91mm x 44mm (5.25 x 3.6 x 1.75)
Power: 120V AC/12V DC 500 mA, UL listed adapter provided

For more information about the Viking Electronics K202DVA, please contact us.

Stores up to seven 32-digit phone numbers (fourteen 32-digit numbers total)
2 minutes of record time (1 minute per input)
Programmable message repeat counter
Programmable lap counter
Two inputs programmable normally open or normally closed and enabled or disabled
Programmable ring delay for remote programming and alarm polling
Local or remote programming and recording
Call progress detection
Programmable resume timer for each input (time following reset for input to become active again)
Phone numbers may be programmed as pager numbers (no voice message played)
Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
Remote security and access codes
Programmable ringback limit for call progress
Compatible with the RC-2A and RC-3 remote DTMF controllers
Non-volatile memory (no batteries required)