Viking E-65-BK-EWP Satin Black Double Gang Entry Phone with Color Video Camera and Enhanced Weather Protection

The E-65 Series Video Entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree audio communication and color composite video of who is at your door or gate. The E-65's compact size allows it to be mounted in a standard single gang electrical box. The E-65 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-65 faceplates (PNL65) can be purchased separately and are available in all five standard finishes.

The E-65 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C- 250 or C-2000B Entry Phone controller. The E-65 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking K-1900-5 or K-1900-30 dialer.

The E-65 features a built-in high resolution color video camera, microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed.

For outdoor installations where the unit is exposed to precipitation or condensation, the E-65 Series is available with Enhanced Weather Protection (EWP).

UPC: 615687224054
Also known as: VK-E65BKEWP, E65BKEWP

Technical Specifications: Connections: (5) gel-filled butt connectors (3M Scotchlok UR2) Shipping Weight: 0.55 kg (1.2 lbs) Humidity: up to 100% non-condensing Operating Temperature: -34 C to 65 C (-30 F to 150 F) Entry Phone / Camera Specifications Maximum Wire Run Length: 750 ft with *RG59/RG6 for video and CAT5 for power (3 pairs) and entry phone audio (1 pair). 150 ft with CAT5E for video, power and entry phone audio. * Note: RG59 or RG6 with solid center conductor and 95% bare copper braid shield. Recommended Surface Mount Box: Viking model VE-3x5 (DOD# 424) Recommended Electrical Box for Flush Mounting: Double gang with minimum inside dimensions of 2.25 deep x 3.65 wide x 2.84 tall (Allied molded 9331 or equivalent) IR Compatibility: This camera is equipped with an OLP (Optical Low Pass) filter to maintain correct video color in outside applications. The standard camera is NOT compatible with IR illuminators. If IR illumination is required, you will need to replace the exisiting camera with a Viking model VCAM-1IR. For more information, see DOD# 190. Tilt/Swivel Adjustment: Vertical +/- 20, horizontal +/- 30 (see Diagram A) Lens: 3.4mm, pinhole 70 FOV (Field of View) Sensitivity: 0.26 LUX (20 IRE) F 2.0 Resolution: 420 lines (640 x 480 @ 30fps / 307,200 pixels) Video Output: 1 VP-P composite, NTSC, 75 ohms Image Sensor: 1/4 color CMOS Power: 3.5-6V DC regulated 150mA (5V DC regulated adapter included) Camera Specifications REN: 0.8A CPC Disconnect Time: 300ms minimum Ring Voltage: 25V AC RMS minimum (for auto answer) Speaker Volume: Approximately 62db maximum @ 1m Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875 x 4.938 x 0.17), Phone: 72mm x 46mm x 42mm (2.84 x 1.8 x 1.65) Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1B Talk Battery Booster (see DOD# 632). Entry Phone Specifications

For more information about the Viking Electronics E-65-BK-EWP, please contact us.