Viking E60BNEWP Oil Rubbed Bronze Double Gang Entry Phone with LED and Enhanced Weather Protection

The E60 Series entry phones are compact, vandal resistant, telephone line powered speaker phones designed to provide twoway handsfree communication. The E60's compact size allows it to be mounted in a standard double gang electrical box. The E60 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E60 faceplates (PNL60) can be purchased separately and are available in all five standard finishes.

The E60s blue LED continually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming ring.

The E60 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller. The E60 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer.

The E60 features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed.

For outdoor installations where the unit is exposed to precipitation or condensation, the E60 Series is available with Enhanced Weather Protection (EWP). For more information on EWP, see DOD# 859.

UPC: 615687223965
Also known as: VK-E60BNEWP

Technical Specifications: Connections: (2) gel-filled butt connectors REN: 0.8A CPC Disconnect Time: 300ms minimum Ring Voltage: 25V AC RMS minimum (for auto answer) Speaker Volume: Approximately 62db maximum @ 1m Humidity: up to 100% non-condensing humidity Operating Temperature: -34 C to 65 C (-30 F to 150 F) Shipping Weight: 0.55 kg (1.2 lbs) Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875 x 4.938 x 0.17), Phone: 72mm x 46mm x 42mm (2.84 x 1.8 x 1.65) Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1B Talk Battery Booster (see DOD# 632).

For more information about the Viking Electronics E60BNEWP, please contact us.