Viking ES1 Stand Alone Door Controller Entry System

The ES1 is a door controller designed to operate a door strike or magnetic lock upon receiving a valid card read and/or keyless entry code from Wiegand devices. One ES1, one or two Wiegand devices and a door strike or magnetic lock of your choice is required for each entry point.

The Wiegand device used may be the Viking model PRX-1 or PRX-3 Proximity Card Reader and/or the Viking model PRX-2 or PRX-4 Wiegand Output Keypad or any other card reader, RF transmitter or digital keypad that outputs the 26 bit Wiegand format. If two Wiegand devices are used, one can be placed on each side of a doorway to control access in both directions (entry and exit). Up to 250 valid Wiegand codes can be programmed into the ES1.

Other programmable parameters, like relay activation, mode (normal, off, or open) and facility codes are also stored in non-volatile memory. All programming is done with a local touch tone phone. Up to three ES1s can be programmed simultaneously if they will be sharing all the same programming codes and parameters. Entry logging is possible with the ES1s log bus data output.

UPC: 615687222357
Also known as: VK-ES1

Technical Specifications: Connections: 11 screw terminals, (1) RJ-11 telco jack Maximum LOG BUS Length: 1610m (5280 ft - 1 mile), 24 AWG Maximum Wiegand Length: 152m (500 ft) - 24 AWG Relay Contact Ratings: 5A @ 30V DC/250V AC maximum Environmental: 0 C to 32 C (32 F to 90 F) with 5% to 95% non-condensing humidity Shipping Weight: 1.3 kg (3 lbs) Dimensions: 133mm x 89mm x 44mm (5.25 x 3.5 x 1.75) Power: 120V AC/12V DC 500mA, UL listed adapter provided or use any 12-24V AC or DC source @ 100mA (designed to share power with the door strikes power supply)

For more information about the Viking Electronics ES1, please contact us.