TekTone SF523UL Wireless Emergency Room Station
-
MPN: SF523UL
-
JMAC ID: 202165928
The TekTone SF523UL is a wireless emergency room station designed for the Tek-CARE500 Wireless Nurse Call System in assisted living and senior care facilities. Featuring a fully supervised 900 MHz wireless transmitter, emergency call button, optional pull cord, call assurance LED, and reset button, it enables residents to request staff assistance. The station operates on a replaceable 3V lithium battery, includes three interchangeable call labels, and is UL 2560 listed for emergency call applications.
TekTone SF523UL Tek-CARE500 Wireless Emergency Room Call Station
The TekTone SF523UL Wireless Room Station provides emergency call signaling and resident assistance notification for assisted living communities, senior living facilities, and other care environments using the Tek-CARE500 Wireless Nurse Call System. Designed for wall-mounted installation in resident rooms, bathrooms, and common areas, the station allows occupants to initiate a call by pressing the integrated call button or activating an optional pull cord. A call assurance LED illuminates when a call is placed, providing visual confirmation that the request has been initiated. The station also features a dedicated reset button for clearing calls at the point of origin. Three interchangeable button inserts labeled Help, Assist/Check-In, and Emergency support different facility notification requirements. The SF523UL replaces the earlier SF529UL, SF531UL, and SF337C/SF527UL combination in compatible Tek-CARE500 installations.
The SF523UL incorporates a fully supervised 900 MHz wireless transmitter that communicates with compatible Tek-CARE500 receiving equipment without requiring dedicated signal wiring between the room station and central controller. When activated, the station transmits a call that is displayed on appropriately configured master stations, duty stations, staff applications, and monitoring displays assigned to the corresponding notification zone. Using TekTone LS450 ConfigTool software, administrators can configure the station for emergency calls, assistance requests, or resident check-in functions. The call button and optional pull cord are programmed for emergency signaling by default, while additional call types and custom button labels can be configured to meet facility requirements. The station operates using a field-replaceable 3.0V lithium battery (BA505) and includes an integrated battery ON/OFF switch. Wireless supervision and low-battery reporting support ongoing maintenance and identification of communication or battery-related conditions.
The TekTone SF523UL features a compact surface-mounted housing constructed from UL94V-0 flame-retardant plastic, supporting installation in resident rooms and other care facility locations. With the required IH521K mounting kit, the station measures 4.57 inches high, 3.23 inches wide, and 1.42 inches deep. The mounting assembly accommodates nonmetallic single-gang backboxes, low-voltage mounting rings, and compatible nonmetallic wall surfaces. Its snap-in bezel construction conceals mounting screws for a finished appearance while allowing access to the internal battery and operating components. The optional RP187K water-resistant gasket supports installations in wet environments, including shower rooms and bathrooms, where additional moisture protection is required. The station has a specified operating temperature range of -40 C to 70 C (-40 F to 158 F). Proper wireless coverage, installation height, and mounting location should be established according to TekTone's system installation requirements.
The SF523UL is UL 2560 listed under UL File E71599 for use in compatible assisted living and independent living emergency call systems. Operation requires a Tek-CARE500 Wireless Nurse Call System, NC475DESK central equipment with an LS500 connectivity license, and the IH521K mounting kit. The station is not designed to operate independently or communicate directly with the older NC470 Tek-BRIDGE controller. Before installation, the battery switch must be moved from its factory-shipped OFF position to ON, and the optional pull cord mechanism must be assembled according to the manufacturer's instructions. The SF523UL can also support scheduled resident check-in functions through appropriate system programming. Its replaceable battery, configurable call types, and supervised wireless communication provide a flexible emergency notification solution for expanding or upgrading compatible Tek-CARE500 systems. TekTone's current installation manual specifies a 3-year manufacturer warranty for purchased SF500-series stations, subject to applicable warranty terms.
UPC: 812664023758
Also known as: T9-SF523UL
For more information about the TekTone SF523UL, please contact us.