Takex PIR30WE Passive Infrared Sensor

With a mounting height up to 3.5m coupled with a creep zone of less than 1m, we offer 30m x 30m high-density coverage. Using the highest quality mirrored optics coupled with twin pyros, TAKEX offer the most professional long-range outdoor PIRs to date.

UPC: 100000901144
Also known as: PU-PIR30WE, PIR30WE

Technical Specifications: Accessory: Waterproof grommet: 1pc, Tapping screw: 2pcs Appearance: Body: ABS resin, Cover: PE resin Weight: 1600g (56oz) Wiring: Terminals Ambient temperature: -20°C to +50°C (+4°F to +122°F) Functions: Low supply voltage alarm, Tamper signal, LED control (L/C), Alarm LED (ON/OFF), Sensitivity adjustable between 30% and 170% Alarm LED: Red LED, Blinks during warm-up (approx. 1 min), One shot lights (approx. 2 secs) at detection, Continuously lights when detecting low supply voltage Tamper output: Dry contact output: (NC), 30V (AC/DC) 0.1A (resistive load), Tamper output: real time output Alarm output: Dry contact (semi-conductor) output (NC/NO), 24V (AC/DC) 0.25A (resistive load) (protective resistor 3.3Ω), Warm up: approx. 1 min. (no alarm condition), One-shot output at detection (approx. 2sec.), Continuously output when detecting low supply voltage Current consumption: 25mA max. Supply voltage: 9 to 30VDC (non-polarity) Mounting position: Indoor or outdoor wall Coverage adjustment: Vertical: 10 degrees, Horizontal: ±5 degrees Sensitive zone: 30 zones (60 beams) Coverage: Wide angle: 30m (100ft) max. Detection system: Passive infrared

For more information about the Takex PIR-30WE, please contact us.