Takex PBIN75SW Photoelectric Beam Sensor

The PB-IN-75SW is an active infra-red photoelectric beam designed specifically for low-current, low-voltage use. This makes them particularly suitable for wireless applications, or difficult-to-cable-to sites without (or unstable) power. An optional Solar panel and Battery Pack (BA-6SL) is available.

They can be used with any make of wireless transmitter (or GSM diallers) to create temporary or permanent secure wireless systems, and can easily be integrated into conventional wired systems at a later date, should mains power become available.

UPC: 100000900963
Also known as: PU-PBIN75SW, PBIN75SW

Technical Specifications: Weight: Transmitter : 300g (10.6oz), Receiver : 400g (14.1oz) Wiring: Terminals Mounting positions: Outdoor (Perimeter protection) Beam Adjustment: Horizontal: ±90° / Vertical: ±10° Ambient temperature range: -35°C to +66°C (-31°F to +151°F) Functions: Modulated beam frequency selection (4-Channel), Environmental module, Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Sound check : Audible check of beam level, Monitor jack output Attenuation LED: Red LED (Receiver), ON : when beam is attenuated Alarm LED: Red LED (Receiver), ON : when an alarm is initiated Environmental Output: Dry contact relay Form C, Action : Output when weather conditions worsen, Contact capacity : 30V (AC/DC) 0.5A or less Alarm output: Dry contact relay output form C, Reset : Interruption time + off delay 2 secs., Contact capacity : (30V AC/DC) 1A Current consumption: 5V to 8VDC : 6mA or less when armed, 10V to 30VDC : 25mA or less when armed Supply voltage: 5V to 8VDC or 10V to 30VDC (with-polarity) Response time: 50msec. to 700msec. variable (Standard : 50msec.) Max Beam Range: Outdoor 750m (2500ft) or less Protection distance: Outdoor 75m (250ft) or less Infrared beam: LED pulsed beam, Double modulation Detection system: Simultaneous interruption of beams

For more information about the Takex PB-IN-75SW, please contact us.