Takex PBIN100AT Photoelectric Beam Sensor

The PB-IN-100AT is designed with high security applications in mind, where attempts to crawl through a portion of the beam result in an alarm condition. Through CPU processing, the upper receiver selects the beam from the upper transmitter and the lower receiver selects the beam from the lower transmitter, creating an AND/OR-gated type detection system.

UPC: 100000900901
Also known as: PU-PBIN100AT, PBIN100AT

Technical Specifications: Attenuation LED: Red LED (Receiver), ON : when beam is attenuated Alarm LED: Red LED (Receiver), ON : when an alarm is initiated Environmental Output: Dry contact relay output 1c, Action : Output when weather conditions worsen, Contact capacity : 30V AC/DC, 1A or less Alarm output: Dry contact relay output form 1c, Contact action : Interruption time + delay time, Contact capacity : 30V AC/DC, 1A or less Current consumption: 85mA or less Supply voltage: 12V to 30VDC (Non-polarity) Response time: Dual response time system : 35-500msec. (AND) 100, 200, 300, 500msec. (OR) Beam arrival distance (max.): Outdoor 1000m (3300ft) or less, Indoor 1000m (3300ft) or less Protection distance: Outdoor 100m (330ft) or less, Indoor 200m (660ft) or less Weight: Transmitter : 1200g (42oz), Receiver : 1300g (45.5oz) Wiring: Terminals Mounting positions: Outdoor (Perimeter protection) Beam Adjustment: Horizontal: ±90° / Vertical: ±10° Ambient temperature range: -35°C to +66°C (-31°F to +151°F) Functions: Modulated beam frequency selection (4-Channel), Environmental module, Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Sound check : Audible check of beam level, Monitor jack output, Frost proof cover Infrared beam: LED pulsed beam, Double modulation Detection system: Simultaneous breaking of 4 beams or Upper 2 beams interruption or Lower 2 beams interruption

For more information about the Takex PB-IN-100AT, please contact us.