Takex FS6000E Flame Sensor with Speaker

The flame sensor FS-6000 immediately detects ultraviolet rays contained in flames and outputs a warning message and activates an external output. The sensor and speaker combined body can be installed either indoors or outdoors.

UPC: 100000901335
Also known as: PU-FS6000E

Technical Specifications: Supplied accessories: Installation flange: 1pc, Tapping screw 1 type ∅4x30(SUS): 4pcs, Area mask seal: 1pc Appearance: Sensor part: PC resin (black), Bracket: PPO resin (black) Weight: Approx. 1kg (35oz) Installation: Indoor/outdoor Ambient temperature: -20°C to +50°C (-4°F to +122°F) Installation method: Screw on flange Wiring: Reed wiring, Power supply: 2 / dry contact: 3 LED: Red LED: blinks during warning message output External output: Dry contact relay Form C (NO/NC), Contact capacity: 30V (AC/DC) 0.5A or less, (resistance load), Output operation: off delay approx. 2 secs Volume: Mute - 100dB approx. (1m ahead) Message selection: 4 options available (selectable) English: Inflammable materials in this area. No naked flames., Spanish: Materiales inflamables en este area. Sin llamas, French: Produits inflammables pas de flammes nues, Italian: Attenzione zona a rischio incendi, non fumare e non usare flamme liebre Warning message output: Operation: output warning message when detecting flames (one-shot) Power consumption: Standby: 35mA or less, Activation: 500mA or less Power supply: 12VDC Sensitivity adjustment: Sensitivity: L (50%) to H (100%) (selectable), Detection timer: 1sec, 6sec, 15sec, 30sec (selectable) Detection area: Distance: 10m (33ft) max. (7cm flame); Angle - Horizontal: approx. 100°, Vertical: approx. 75° (15° upward/60° downward); Adjustment range - Horizontal: 180°, Vertical: downward 90° Detection system: Ultraviolet rays detection (detected wave length 185~260nm)

For more information about the Takex FS6000E, please contact us.