516-812-0917
Help
Live Chat
The Schlage ND80 is the storeroom lock function (ANSI F86) of the ND Series, Schlage heavy duty Grade 1 cylindrical lock. The outside lever is always fixed, the latch is retracted by the inside lever, and the key in the outside lever retracts the latch only. The inside lever is always free for immediate egress.
There is no unlocked state to set. The door is permanently secured against entry and every entry takes a key, so it cannot be left standing open to anyone who wanders past. That is exactly what you want on supply rooms, utility and mechanical spaces, IT and server rooms, medication and equipment storage, and any back of house door that should never be casually accessible.
Note the distinction that trips people up: the key retracts the latch so a keyholder can get in, but it does not unlock the outside lever. The lever stays fixed before, during, and after. Nothing can leave the opening unsecured by accident.
The optional RX request to exit switch is available on this function, so the access control system can see authorized exits. It takes conventional, FSIC, or SFIC cylinder formats on the patented Everest 29 S123 keyway, with 3,100 in-lb of abusive lever torque resistance (2.6x BHMA) and near zero droop and wobble after 16 million cycles (16x BHMA).
Features
- Storeroom lock function - key cylinder outside, plain lever inside, deadlatch.
- Outside lever always fixed - the door is permanently secured against entry.
- Key in the outside lever retracts the latch only and does not unlock the lever.
- No unlocked state, so the opening cannot be left unsecured.
- Latch retracted by the inside lever at all times.
- Inside lever always free for immediate egress.
- Optional RX request to exit switch, specified under special options.
- Conventional, FSIC, and SFIC cylinder formats, plus less-cylinder options for existing key systems.
- Patented Everest 29 S123 keyway standard on conventional and FSIC cylinders.
- Keyed different, keyed alike, master keyed, or construction keyed.
- ANSI/BHMA Grade 1 certified to A156.2-2011, Series 4000.
- Resists 3,100 in-lb of abusive lever torque, 2.6 times the BHMA requirement.
- Restricts entry against 1,600 lbs of offset lever pull, 8 times BHMA.
- Near zero droop and wobble after 16 million cycles, 16 times BHMA, with no set screws or O-rings.
- Nine ADA compliant lever designs and nine finishes; UL Listed 3 hour fire rated and BAA compliant.
Specifications
Function
- Schlage Function
- ND80 storeroom lock
- ANSI Function
- F86
- Trim
- Lever with key cylinder outside; lever inside; deadlatch
- Outside Lever
- Always fixed
- Latch Operation
- Latch retracted by the inside lever. Key in the outside lever retracts the latch only
- Egress
- Inside lever always free for immediate egress
- Cylinders Required
- One, outside
- Request to Exit
- RX available on this function, specified under special options
Cylinders and Keying
- P6
- Conventional 6-pin cylinder, Everest 29 S123 keyway
- P
- Conventional 6-pin cylinder keyed 5-pin, Classic C keyway
- L
- Less conventional cylinder, for supplying your own
- R
- FSIC 6-pin full size interchangeable core
- J
- Less FSIC core, for an existing full size interchangeable core system
- H
- Refundable construction SFIC core
- B
- Less SFIC core, for an existing small format interchangeable core system
- Keying
- Keyed different (standard), keyed alike, master keyed, or construction keyed
- Default Keyway
- Everest 29 S123 on conventional and FSIC cylinders. Master keyed systems default to Everest 29 S145
- Pack Cylinders Loose
- PCL available if cylinders should ship uninstalled
Performance
- Abusive Lever Torque
- 3,100 in-lb, equivalent to over 690 lbs at the end of a 4-1/2 inch lever (2.6x BHMA)
- Offset Lever Pull
- 1,600 lbs (8x BHMA)
- Vertical Impact
- 100 impacts with no failure or indication of stress (20x BHMA)
- Cycle Life
- Near zero droop and wobble after 16 million cycles (16x BHMA)
- Latch Preload
- Latch retraction with 200 lb preload (4x BHMA)
Chassis and Trim
- Chassis Material
- Modular design of zinc and steel components, plated for corrosion protection
- Handing
- Non-handed
- Door Thickness
- Standard 1-5/8 to 2-1/8 inches. Optional 1-3/8 inches to 6 inches in EE, EO, EI, and ED configurations
- Backset
- Standard 2-3/4 inches, with 3-3/4 inch latches available and a 5 inch backset extension
- Lever Designs
- Athens (ATH), Boardwalk (BRK), Broadway (BRW), Latitude (LAT), Longitude (LON), Omega (OME), Rhodes (RHO), Sparta (SPA), Tubular (TLR), in pressure cast zinc plated to match the finish. The inside lever can be specified the same as outside or as a different design
- Roses
- Wrought brass or zinc, plated to match the finish. Rose diameter 3-7/16 inches
- Finishes
- 605 bright brass (US3), 606 satin brass (US4), 612 satin bronze (US10), 613 oil rubbed bronze (US10B), 619 satin nickel (US15), 622 matte black (US19), 625 bright chrome (US26), 626 satin chrome (US26D), 643e aged bronze
Latch Options
- 13-247
- Deadlatch, 2-3/4 inch backset, 1-1/8 x 2-1/4 inch square corner faceplate (standard)
- 13-248
- Spring latch, 2-3/4 inch backset
- 14-028
- Deadlatch, 3-3/4 inch backset, 1-1/8 x 2-1/4 inch square corner
- 14-010
- Spring latch, 3-3/4 inch backset, 1-1/8 x 2-1/4 inch square corner, non-restoring
- 14-042
- Anti-friction fire deadlatch, 3/4 inch throw, 2-3/4 inch backset, for pairs of doors
- 43-005
- 5 inch backset extension
Strike Options
- 10-025
- ANSI strike, 1-1/4 x 4-7/8 inches, 1-3/16 inch lip (standard). Also available with the K510-066 dust box, or with a 1-3/8 or 1-1/2 inch lip
- XQ07-351
- 10-025 strike with a 7/8 inch flat lip, or special lip lengths through 6 inches
- 10-013
- T-strike with dust box, 1-1/8 x 2-3/4 inches, with a 1-1/8 or 1-1/2 inch lip
- 10-016
- T-strike with deep dust box for the 3/4 inch fire latch, 1-1/8 x 2-3/4 inches
Certifications
- ANSI/BHMA
- A156.2-2011, Series 4000 Grade 1 cylindrical locks
- Accessibility
- Complies with ICC A117.1 Accessible and Usable Buildings and Facilities
- Fire
- UL 10C and CAN/ULC-S104. Three hour A label single fire door 4 ft by 10 ft. Pairs of doors three hour at 8 ft by 8 ft with the 3/4 inch latch option; pairs 90 minute at 8 ft by 10 ft with the 3/4 inch latch option
- California Fire Code
- Levers with a return to door of 1/2 inch or less comply: Rhodes, Sparta, Tubular, Omega, Longitude, and Boardwalk
- Florida Building Code
- Complies with Florida Building Code (ASTM E330, E1886, E1996) and Miami Dade (TAS 201, 202, 203) hurricane requirements
- Federal
- Meets FF-H-106C Series 161. BAA compliant on all functions
- Warranty
- 10 year mechanical and 3 year electro-mechanical
Frequently Asked Questions
- What does ND80 mean?
- It is the Schlage function code for the storeroom lock, ANSI F86. The outside lever is always fixed and the key retracts the latch only.
- Does the key unlock the outside lever?
- No, and this is the detail people miss. The key retracts the latch so a keyholder can open the door, but the outside lever stays fixed the whole time. There is no way to leave it unlocked.
- Can I leave the door unlocked for a delivery?
- Not with this function - there is no unlocked state. If a room sometimes needs to stay open, look at the ND70 classroom lock or the ND53 entrance lock instead.
- Can people get out from inside?
- Yes. The inside lever is always free for immediate egress and needs no key, which matters when staff are leaving a supply room with their hands full.
- Can I get an exit signal to my access control system?
- Yes. The RX request to exit switch is available on the ND80 and is specified under special options. Only a short list of ND functions offer it.
- How is this different from the ND81 accessible storeroom lock?
- Whether the key can leave the outside lever usable. On the ND80 the outside lever is fixed at all times. On the ND81, a 180 degree clockwise rotation of the key allows the outside lever to retract the latch, which suits openings needing accessible operation. Ask us if that is a better fit.
- Which cylinder option do I pick?
- Match your existing key system. P6 is conventional on the patented Everest 29 S123 keyway, the Schlage default. P is conventional on the open Classic C keyway. Pick R for a 6-pin FSIC core, H for a refundable construction SFIC core, or L, J, or B to receive the lock less cylinder or less core.
- Can these be keyed to my existing keys?
- Yes. Choose keyed alike for a group that should open on one key, or master keyed to fold them into an existing system. Send us your keyway and bitting or a sample key. Construction keying is also available.
- Which latch do I need?
- The standard 13-247 deadlatch on a 2-3/4 inch backset covers most doors. Use a 3-3/4 inch latch for deeper stiles, and the 14-042 anti-friction fire deadlatch with its 3/4 inch throw on pairs of doors, which is also what the pair-door fire listings require.
- Does the lever choice matter for code?
- It can. For the California Fire Code, levers with a return to door of 1/2 inch or less comply, which covers Rhodes, Sparta, Tubular, Omega, Longitude, and Boardwalk. Confirm the lever design against your local requirements.
