 |
 |
 |
|
Macurco CM-1XLS Single-Gas Carbon Dioxide Monitor, 4 Alarm Settings, Short Term Exposure Limit, Time Weighted Average
Also known as: CM1XLS, MA-CM1XLS
The Macurco CM-1XLS is designed to provide continuous monitoring of the ambient environment for either Carbon Monoxide (CO). The gas detected by the sensor installed in the instrument is identified on the label located on the front of the unit. Accuracy of the instruments gas sensor readings can vary up to 25% depending on the accuracy of the calibration gas, how often the instrument is calibrated, environmental conditions (temperature, atmospheric pressure, humidity, air velocity), cross interference gases, or time of exposure to the target gas.
Calibrating with the appropriate certified calibration gas prior to use, within the same environmental conditions in which the instrument will be used, will increase the accuracy of the instruments gas concentration reading. An internal microprocessor controls the indication and alarm functions in response to the signals received from an electrochemical sensor permanently mounted inside the unit. When turned on, it continuously monitors the ambient air that enters the sensor through the sensor inlet opening by the process of passive diffusion. If the level of the target gas detected by the sensor reaches a factory preset alarm point, the unit will alarm. |
Features:
- Carbon dioxide monitor
- Four different user selectable alarm settings
- Short Term Exposure Limit (STEL) and Time Weighted Average (TWA)
- Audible, visual, and vibrating alarms give you the notice you need to appropriately respond to the presence of targeted gases.
- With the push of a button, gas and peak readings, and alarm set points instantly appear in the display.
- Engineered to go anywhere, it can be easily clipped to your pocket, belt or hardhat.
|
Technical Specifications:
- Size: 3.2 x 2.0 x 1.2 in. (8.1 x 5.1 x 3.1 cm)
- Weight: 4.1 oz. (11 5 g)
- Ingress Protection Rating: IP54
- Sensor: Electrochemical (factory replaceable)
- Operating Humidity: 15 90% (non-condensing)
- Readout: Direct read LCD
- Range: 0-995 ppm (CO)
- Alarm Indicators Visual: Flashing LCD display and Red LED, Audio: 85 dBA @ 1 foot (30.5 cm) buzzer, Tactile: Internal vibrator
- Alarm Readings: Low, High, Low Battery, Over Range, TWA, and STEL alarms
- Alarm Settings: 4 user selectable alarm settings
- Reading Resolution: 1 ppm (readings start at 5 ppm)
- Test Function: Self-test on circuitry, battery and alarms. Automated sensor test reminder.
- Sensor Replacement: Factory replaceable
- Intrinsic Safety: UL Classified - Class I, Div. I, Group A, B, C & D, T4
- Power: Permanently mounted, non-rechargeable 3.6-volt Lithium battery (factory replaceable)
- Radio Frequency Protection: <10% deviation of alarm level when subjected to 450MHz, 5 Watt Radio @ 2ft (61cm)
- Keypad: One button operation
- Operating Temperature Range: -4 to 122F (-20C to 50C)
|
Average rating: 5.0, based on
1 review
For more information about the Macurco CM-1XLS, please contact us.
|
|
|
 |
|
 |
|
