Home > Macurco > Combustible Gas Detectors >

Macurco GD-2B Combustible Gas Detector
GD-2B Macurco | JMAC Supply
In Stock
Our Price: $118.90

Product Code: MACURCO-GD-2B

Description Product Resources

Macurco GD-2B Combustible Gas Detector

  • Also known as: GD2B, MA-GD2B

  • The Macurco GD-2B is a low voltage electronic detector of combustible, heating type gases. The GD-2B is designed for connection to Fire Alarm/Burglary Control Panels. The GD-2B is intended for installation in buildings in non-hazardous locations such as residences, retail stores, office buildings, and institutional buildings. This combustible gas detector has been designed to detect methane (natural gas) and propane (LP) gas. It is NOT designed to detect smoke, fire or carbon monoxide.
    • Designed to meet UL standard 2075 for the Standard For Safety for Gas and Vapor
    • Detector and Sensors
    • Sensitivity tested based on UL 1484 Standard for Residential Gas Detectors
    • Surface mounts to a wall using the supplied enclosure rear housing
    • Flush mounts in a 2 x 4 (1-1/2 inch deep minimum) single gang switch, or handy electrical box
    • Small, low profile, attractive unit in a white plastic case
    • Can be self-restoring or latching
    • Test & Reset switch conducts internal tests and actuates alarm relay
    • Solid State Electronic sensors: no maintenance or recalibration
    • N.O. or N.C. SPST Alarm Relay and N.C. SPST Trouble relay to connect to Alarm Control Panels
    • Optional Buzzer: Produces repeating loud tone bursts during alarm, and chirps if sensor trouble is found

    Technical Specifications:

    • Size: 3-1/8 X 5-1/8 X 1-1/2 inch (7.94 x 13.02 x 3.81 cm)
    • Alarm Relay: SPST, 100mA, 40VDC
    • Trouble Relay: SPST, 100mA, 40VDC
    • Buzzer Rating: 85 dBA at 10 Feet
    • Shipping Weight: 0.54 pound
    • Operating Temp. Range: 40F (4.4C) to 100F (37.8C)
    • Alarm Setting: 25% LEL Per UL 1484
    • For use with a UL Listed Fire Alarm/Burglary Control Panel
    • Sensor Maintenance: not required
    • Voltage: 9-32 VDC 12-24 VAC
    • Current Max (non-alarm): 53 mA @ 9 VDC, 15 mA @ 32 VDC, 64 mA @ 12 VAC, 40 mA @ 24 VAC
    • Current Max (in alarm): 79 mA @ 9 VDC, 21 mA @ 32 VDC, 83 mA @ 12 VAC, 52 mA @ 24 VAC

    UPC: 051135890455

    Average rating: 5.0, based on 1 review

    For more information about the Macurco GD-2B, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Macurco > Combustible Gas Detectors
    Fire & Life Safety > Gas Detectors > Combustible Gas Detectors
    Fire & Life Safety > Gas Detectors