DITEK DTK-4LVLPCR Low-Voltage Card Reader Surge Protector

  • MPN: DTK-4LVLPCR
  • JMAC ID: 200087880
$78.75
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200087880
df_manual_boost:
2.20
Please Note: In order to keep our prices low, we have a minimum order requirement of $99

The DITEK DTK-4LVLPCR is a four-pair low-voltage surge protector designed to protect access control card readers and keypads from damaging electrical transients. Featuring 5,000A surge current protection, 5A maximum continuous current, and compatibility with OSDP and Wiegand protocols, it safeguards 12V/24V power, 5V data, and LED circuits. The device incorporates differential-mode and common-mode surge protection, screw-terminal connections, and a single grounding point. Its compact ABS housing, UL 497B listing, and 10-year limited warranty support commercial access control installations.

DITEK DTK-4LVLPCR Four-Pair Card Reader and Keypad Surge Protector

The DITEK DTK-4LVLPCR Card Reader Surge Protector provides low-voltage surge protection for electronic access control systems in commercial buildings, industrial facilities, offices, warehouses, educational campuses, and secured entrances. Part of DITEK's LVLP Series of low-voltage surge protective devices, the DTK-4LVLPCR protects four pairs of power, data, and LED communication circuits against transient overvoltages associated with lightning-induced electrical disturbances, switching events, and other sources of electrical surges. Designed specifically for Open Supervised Device Protocol (OSDP) and Wiegand access control applications, the device supports compatible proximity card readers, credential scanners, and access control keypads that operate on 12V or 24V DC power. Its multichannel architecture consolidates protection for reader power, communication, and LED control connections into one compact assembly. Unlike surge protectors intended exclusively for power circuits, the DTK-4LVLPCR provides dedicated protection for low-voltage communication conductors while preserving normal signal operation. The unit uses a series-connected wiring arrangement with parallel surge suppression functionality, allowing it to divert transient energy without introducing additional series resistance into the protected circuits.

The DTK-4LVLPCR incorporates 5,000A surge current protection with both differential-mode (line-to-line) and common-mode (line-to-ground) suppression. The device accommodates 12V DC and 24V DC power circuits, 5V DC data circuits, and LED control circuits operating below 5V DC. Maximum continuous operating voltage (MCOV) ratings are 18V for 12V power, 33V for 24V power, 6V for data, and 5V for LED circuits. Corresponding clamping voltage ratings are 22V, 39V, 8V, and 7V, providing voltage-specific suppression for the different electrical functions within a card reader system. The protector supports a maximum continuous current of 5A, allowing integration with compatible low-voltage access control equipment operating within its electrical limits. Its suppression circuitry protects both power and communication pathways without requiring a separate surge protection module for each signal type. A single grounding connection provides a common reference for all protected circuits, simplifying the grounding arrangement and helping reduce differences in electrical potential between connected conductors. DITEK specifies this configuration for access control applications requiring coordinated protection of reader power, data transmission, and LED signaling lines.

The DITEK DTK-4LVLPCR features a compact ABS plastic enclosure measuring 3.3 inches long x 1.55 inches wide x 1.1 inches high (84 x 39 x 28 mm), with a weight of approximately 3.2 ounces (91 grams). The device incorporates screw-terminal connections accommodating 30-12 AWG conductors, providing secure field wiring for compatible low-voltage circuits. Installation requires connecting incoming field wiring to the designated IN terminals and the corresponding protected equipment conductors to the OUT terminals. DITEK specifies a minimum separation of 3 feet (0.91 meters) of wiring between the protector's output terminals and the equipment being protected to support proper surge suppression performance. The unit mounts using the supplied double-sided adhesive tape or two separately supplied #8 mounting screws. A compatible DTK-DRK DIN rail mounting kit is available separately for applications requiring DIN rail installation within an electrical or access control equipment enclosure. The manufacturer requires a minimum 14 AWG grounding conductor connected to a verified grounding system with a maximum resistance of 25 ohms, with 5 ohms or less preferred. When multiple surge protectors are installed on the same circuit, they should share a common grounding reference to minimize differences in ground potential. Installation must follow the manufacturer's wiring instructions and applicable National Electrical Code requirements.

The DTK-4LVLPCR four-pair surge protector is designed for access control installations requiring protection of electronic reader circuits exposed to transient electrical disturbances. Its OSDP and Wiegand compatibility supports integration with appropriately configured access control systems using differential serial communication or traditional Wiegand data signaling. The protector is suitable for 12V and 24V reader power connections, 5V data communication lines, and low-voltage LED control circuits, providing a coordinated protection solution without requiring separate devices for each electrical function. The ABS enclosure supports operation within a temperature range of -40 F to 158 F (-40 C to 70 C) and a maximum relative humidity of 95%, non-condensing. The DTK-4LVLPCR is UL 497B listed for data communication and fire alarm circuit protection applications and meets applicable RoHS requirements. Manufactured in the United States, the device carries a 10-year limited manufacturer warranty. The DTK-4LVLPCR is intended for low-voltage access control circuits and is not designed to protect Ethernet/PoE connections or directly replace AC mains surge protection equipment. Installers should verify reader voltage requirements, communication protocol compatibility, grounding resistance, and circuit current limits before installation. For systems requiring protection of additional low-voltage signaling circuits, DITEK offers other LVLP Series surge protectors with application-specific voltage and channel configurations.



UPC: 782980502346
Also known as: DK-4LVLPCR, DTK4LVLPCR

Technical Specifications:
  • Max Surge Current: 2,000 Amps per pair (Power), 500 Amps per pair
  • Max Continuous Current: 3 Amps Power/Data, 150mA LED,
  • Connection Method: #22-#16 AWG screw terminals
  • Dimensions: 1.6”H x 3.0”W x 1.6”D (41mm x 76mm x 41mm)
  • Maximum Humidity: 95% non-condensing
  • Operating Temperature: -40°F - 158°F (-40°C - 70°C)
  • Protection Modes: Line-Ground (All)
  • Housing: ABS
  • Weight: 4oz (113g)


For more information about the Ditek DTK-4LVLPCR, please contact us.
  • Single ground point for all protected circuits
  • Series connection, parallel function adds no resistance to loop circuits
  • Protect power, LED and data lines
  • Protect 3 or 4 pairs of power/data connections

2 Reviews

  • 5
    DITEK-4LVLPCR

    Posted by 119594 on Nov 7th 2017

  • 5
    DITEK-4LVLPCR

    Posted by 86394 on Jul 12th 2015

Live Chat