Von Duprin 9927EO-4-US28 Exit Only Surface Mounted Vertical Rod Device, Grooved Mechanism, No Outside Trim, 4' Door, Satin Aluminum
-
MPN: 9927EO 4 US28
-
JMAC ID: 200665110
The Von Duprin 9927EO-4-US28 is a surface-mounted rod device designed for doors with a 2'10" to 4' length. The unit is equipped with a grooved mechanism case and no outside trim. The device features a satin aluminum finish.
The 992surface-mounteded vertical rod device is for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The 9927 device has a grooved mechanism case. The surface vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).
Vertical rod and latch guards are available to protect the bottom rod of the exit device from damage by impacts of carts or gurneys passing through doors. The Von Duprin 9927EO-US28-4 series surface mounted vertical rod exit device is well built from heavy gauge rolled steel section and features the tried-and-true heavy-duty touch bar mechanism that has been used so successfully in all architectural grade Von Duprin touch bar devices. It is suitable for all types of single and double doors. The 9927 vertical rod exit device, which features a contemporary touch bar style and hardware that is UL approved for panic exit hardware, is a more affordable option. It is intended primarily for usage in environments where frequent abusive treatment is to be anticipated. On the door's egress side are touch bar exit mechanisms placed. These gadgets have a push bar region for escape and an enclosed mechanism case.
UPC: 43156977970
Also known as: 9927EO4US28
For more information about the Von Duprin 9927EO 4 US28, please contact us.
The 992surface-mounteded vertical rod device is for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The 9927 device has a grooved mechanism case. The surface vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or SS (Signal Switch).
Vertical rod and latch guards are available to protect the bottom rod of the exit device from damage by impacts of carts or gurneys passing through doors. The Von Duprin 9927EO-US28-4 series surface mounted vertical rod exit device is well built from heavy gauge rolled steel section and features the tried-and-true heavy-duty touch bar mechanism that has been used so successfully in all architectural grade Von Duprin touch bar devices. It is suitable for all types of single and double doors. The 9927 vertical rod exit device, which features a contemporary touch bar style and hardware that is UL approved for panic exit hardware, is a more affordable option. It is intended primarily for usage in environments where frequent abusive treatment is to be anticipated. On the door's egress side are touch bar exit mechanisms placed. These gadgets have a push bar region for escape and an enclosed mechanism case.
UPC: 43156977970
Also known as: 9927EO4US28
Technical Specifications:
|
For more information about the Von Duprin 9927EO 4 US28, please contact us.
- Surface mounted vertical rod device for all types of single or double doors
- No outside trim
- Designed for a door length of 2'10" to 4'
- Grooved mechanism case
- Satin aluminum finish
- Von Duprin 33/35 and 98/99 ALK Alarm Kit Installation Instructions
- Von Duprin Pneumatic Exit Device Installation Instructions
- Von Duprin Exit Alarm Kit Sell Sheet
- QEL Sell Sheet
- Von Duprin 33/99 LD Kit Installation Instructions
- 98/9927 Installation Instructions
- 9927 Latch & Strike Templates
- QEL 98/99 Baseplate Conversion Series Installation Instructions
- Von Duprin 33/35 and 98/99 End Cap Retrofit Kit Installation Instructions
- Chexit (CX) Data Sheet
- 98/9927-F-LBR Series Wood Door Template
- Quiet Electric Latch FAQ
- QEL Data Sheet
1 Review
-
VON-DUPRIN-9927EO-4-US28