Von Duprin QEL9827EO 3 US28 Exit Device Quiet Electronic Latch Retraction, Surface Vertical Rod Device, Exit Only, Less Trim, Grade 1
-
MPN: QEL9827EO 3 US28
-
JMAC ID: 200933063
Von Duprin QEL9827EO 3 US28 Grade 1 Surface Vertical Rod Exit Bar, Wide Stile Pushpad, 36" Panic Device, 84" Door Height, Exit Only, Less trim, Motorized Latch Retraction, Less Dogging, Satin Aluminum Clear Anodized Finish, Field Reversible
It is currently possible to purchase the Von Duprin QEL9827EO 3 US28 Aluminum Finish Three Foot Quiet Electric Latch Retraction Vertical Rod Panic Bar Exit Only.
For all types of single doors and double doors, Von Duprin offers vertical rod exit devices in the 98 and 99 series. They are positioned within doors to provide an exit during emergencies when the door will open by pushing against the bar. While the 9927 series has a grooved mechanism case, the 9827 series panic bars have a smooth mechanism case.
Panic bars with vertical rods lock into the top and bottom of the door frame using rods. They can now be used on double doors without a mullion thanks to this. This non-handed vertical rod device can be mounted on doors that swing either left or right because it is non-handed. These components are Grade 1 door hardware and meet the requirements of ANSI A156.32014.
Through a switch, the Quiet Electric Latch Retraction function enables bolt retraction. By doing this, the exit door it is mounted on becomes a push-pull entry door.
There is no trim hardware for the exterior of the door included with the exit-only function panic bar. If used, it would prevent reentry and only permit exit through the door. The Trim needs to be bought separately.
This hardware cannot be used on a fire door since it is not fire-rated.
The aluminum finish is available for this Von Duprin series quiet electric latch retraction panic bar.
Also known as: QEL9827EO3US28
For more information about the Von Duprin QEL9827EO 3 US28, please contact us.
It is currently possible to purchase the Von Duprin QEL9827EO 3 US28 Aluminum Finish Three Foot Quiet Electric Latch Retraction Vertical Rod Panic Bar Exit Only.
For all types of single doors and double doors, Von Duprin offers vertical rod exit devices in the 98 and 99 series. They are positioned within doors to provide an exit during emergencies when the door will open by pushing against the bar. While the 9927 series has a grooved mechanism case, the 9827 series panic bars have a smooth mechanism case.
Panic bars with vertical rods lock into the top and bottom of the door frame using rods. They can now be used on double doors without a mullion thanks to this. This non-handed vertical rod device can be mounted on doors that swing either left or right because it is non-handed. These components are Grade 1 door hardware and meet the requirements of ANSI A156.32014.
Through a switch, the Quiet Electric Latch Retraction function enables bolt retraction. By doing this, the exit door it is mounted on becomes a push-pull entry door.
There is no trim hardware for the exterior of the door included with the exit-only function panic bar. If used, it would prevent reentry and only permit exit through the door. The Trim needs to be bought separately.
This hardware cannot be used on a fire door since it is not fire-rated.
The aluminum finish is available for this Von Duprin series quiet electric latch retraction panic bar.
Also known as: QEL9827EO3US28
Technical Specifications:
|
For more information about the Von Duprin QEL9827EO 3 US28, please contact us.
- Von Duprin Pneumatic Exit Device Installation Instructions
- Von Duprin 33/35 and 98/99 End Cap Retrofit Kit Installation Instructions
- Von Duprin 98/99 Series Catalog
- 9927 Latch & Strike Templates
- Quiet Electric Latch FAQ
- Von Duprin WS9827/WS9927 Windstorm Exit Device Installation
- Von Duprin Exit Alarm Kit Sell Sheet
1 Review
-
VON-DUPRIN-QEL9827EO-3-US28