Viking LV-1K Line Verification Panel with Key Switch

New ASME A17.1-2010 code requires that the two-way communications means within the (elevator) car shall include a means to verify operability of the telephone line. When your local municipality adopts this new ASME A17.1 code the LV-1K can be added to fulfill all requirements for visual and audible signaling when it is determined the telephone line is not functioning.

The LV-1K is essentially two products in one. First, it can be added to any new or existing Viking 1600A Series elevator emergency as a single phone stand alone solution. With the LV-1K installed, the 1600A Series phone will check the telephone line for dial tone on a daily basis. The LV-1K will provide an audible and visual indication when the telephone line is not functional.

Second, it can be wired to a Viking model LC-6 six port concentrator, to provide visual and audible signaling for any grouping of elevators that are controlled by the same FIRE RECALL switch. The LC-6 not only allows 2 to 6 Viking elevator emergency phones share the same LV-1K Line Verification Panel, but it also allows the cost savings of those phones being able to share a single telephone line, and still meet all requirements of ASME A17.1.

In accordance to ASME A17.1, the LV-1K has labeled ELEVATOR COMMUNICATION FAILURE in high red letters, and will sound an audible signal every 30 seconds and flash a red light when a telephone line fault is detected. Authorized personnel can silence the audible signal with the included key switch. The LED will remain flashing until the fault is corrected.

UPC: 615687225198
Also known as: LV1K, VK-LV1K

Technical Specifications: Connections: (6) color-coded wires with (6) gel-filled butt connectors Maximum Power Supply Wire Length: 244m (500 ft) with #24 gauge wire Environmental: 0 C to 32 C (32 F to 90 F) with 5% to 95% noncondensing humidity Shipping Weight: 0.7 kg (1.5 lbs.) Dimensions: 124 mm x 124 mm x 33 mm (4.9 x 4.9 x 1.3) Power: 120V AC/ 12V DC UL Listed adapter provided

For more information about the Viking Electronics LV-1K, please contact us.