Viking K17053BN Oil Rubbed Bronze Vandal Resistant Video Entry Phone with Keypad

  • MPN: K17053BN
  • JMAC ID: 200216010
$746.00
JMAC_ID:
200216010
df_manual_boost:
1.75
The K17053 provides a tough and attractive handsfree phone for apartment, and residential door/gate entry or applications requiring a vandal resistant speaker phone with built-in color CCTV video camera.

When the Call button is pressed, the K17053 returns dial tone. The keypad may then be used to dial any number. If no Touch Tone is entered within 8 seconds, CPC is detected, a busy signal is detected, or the programmable maximum call time has elapsed, the K17053 will automatically disconnect. Alternatively, the K17053 may be disconnected by pressing the Call button again. The K17053 features a built-in high resolution color video camera, microphone and speaker volume controls, selectable auto answer for monitoring, a yellow In-Use LED and comes complete with a standard flush mount rough-in box. In addition, an optional VE-6x7 weather resistant surface mount box is available.

UPC: 615687223842
Also known as: VK-K17053BN

Technical Specifications:
  • Connections: (3) gel-filled butt connectors (3M Scotchlok UR2) and 2-position terminal block
  • Humidity: 5% to 95% non-condensing
  • Operating Temperature: -34 C to 65 C (-30 F to 150 F)
  • Entry Phone / Camera Specifications
  • Maximum Wire Run Length: 1000 ft with RG59/RG6 for video and CAT5 for power (doubled pairs) and entry phone audio. 150 ft with CAT5E for video, power and entry phone audio
  • Tilt/Swivel Adjustment: Vertical +/- 20, horizontal +/- 30
  • Lens: 3.4mm, pinhole 70 FOV (Field of View)
  • Sensitivity: 0.26 LUX (20 IRE) F 2.0
  • Resolution: 420 lines (640 x 480 @ 30fps / 307,200 pixels)
  • Video Output: 1 VP-P composite, NTSC, 75 ohms
  • Image Sensor: 1/4 color CMOS
  • Power: 5-9V DC regulated 150mA (6V DC adapter included)
  • Camera Specifications
  • REN #: 0.5 A
  • CPC Disconnect Time: 500ms minimum
  • Ring Voltage: 25V AC RMS minimum (for auto answer)
  • Speaker Volume: Approximately 70 db maximum @1m
  • Shipping Weight: 1.6 kg (3.5 lbs)
  • Dimensions: Overall: 140mm x 165mm x 66mm (5.5 x 6.5 x 2.6) , Rough-in box: 114mm x 140mm x 64mm (4.5 x 5.5 x 2.5)
  • Power: Telephone line powered 20V DC/20mA minimum
  • Entry Phone Specifications


For more information about the Viking Electronics K17053BN, please contact us.
  • Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC reorder tone, maximum call time out and selectable silence time out
  • Selectable push button disconnect
  • Selectable auto-answer feature for monitoring
  • Volume adjustments for microphone and speaker
  • Yellow in use LED
  • Optional Enhanced Weather Protection (EWP) conforms to NEMA requirements
  • Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch and keypad, sealed camera lens, potted camera circuit board, stainless steel phone and camera mounting hardware
  • Vandal Resistant Features: 14 gauge louvered stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and Call button, impact and scratch resistant camera lens and hex drive mounting screws
  • Audio and video transmission on one CAT5E cable
  • Built-in high resolution color video camera with wide viewing, tilt/swivel adjustments and wide operating temperature of -30F to 150F
  • Zinc plated steel rough-in box with (2) 3/4 conduit knockouts
  • Optional VE-6x7 surface mount box available
  • Selectable maximum call time
  • Selectable VOX switching speed

2 Reviews

  • 5
    VIKING-K17053BN

    Posted by 159720 on Aug 14th 2020

  • 5
    VIKING-K17053BN

    Posted by 123929 on Feb 26th 2018

Live Chat