Viking-E70BN Entry Phone with built-in Proximity Card Reader

The E70 Series entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree audio communication. The E70 also includes a built-in 125KHz proximity card reader that supports Viking PRX-C, PRX-C-ISO, PRX-FOB and certain legacy HID proximity protocols. The card reader outputs industry standard 26-bit Wiegand data, allowing it to be used with a Viking ES-1 door controller or any controller compatible with 26-bit Wiegand format.

The E70's compact size allows it to be mounted in a standard double gang electrical box. The E70 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E70 faceplates (PNL70) can be purchased separately and are available in all five standard finishes.

The E70 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller. The E70 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer.

The E70 features a built-in proximity card reader, microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed.

UPC: 615687224115
Also known as: VK-E70BN

Technical Specifications: Ring Voltage: 25V AC RMS minimum (for auto answer) Speaker Volume: Approximately 62db maximum @ 1m Shipping Weight: 0.55 kg (1.2 lbs) Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875 x 4.938 x 0.17), Phone: 72mm x 46mm x 42mm (2.84 x 1.8 x 1.65) Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1B Talk Battery Booster (see DOD# 632). Entry Phone Specifications REN: 0.8A Operating Temperature: -34C to 65C (-30F to 150F) Humidity: Up to 100% (fully potted EWP) LED: Red, turns off during card read Transducer: Beeps during card read Technologies Supported: Viking PRX-C, PRX-C-ISO, PRX-FOB and certain legacy HID proximity protocols* Read Range: 1.25 to 2.0 Format: 26 bit Wiegand Frequency: 125KHz Maximum Cable Length: 500 ft 24 Awg stranded shielded (Belden 9537) Power: 5 to 14V DC @ 60mA maximum Proximity Card Reader Specifications Recommended Surface Mount Box: Viking model VE-5x5 (DOD# 424) Recommended Electrical Box for Flush Mounting: Double gang with minimum inside dimensions of 2.25 deep x 3.65 wide x 2.84 tall (Carlon BH234R or equivalent) Connections: (5) gel-filled butt connectors (3M Scotchlok UR2) Humidity: Standard model: 5% to 95% non-condensing, EWP model: Up to 100% Operating Temperature: -34 C to 65 C (-30 F to 150 F) CPC Disconnect Time: 300ms minimum

For more information about the Viking Electronics E70BN, please contact us.