Viking E40WHEWP Satin White Entry Phone with Enhanced Weather Protection

  • MPN: E40WHEWP
  • JMAC ID: 200215964
$399.13
JMAC_ID:
200215964
df_manual_boost:
1.75
The E40 Series entry phones are compact, weather and vandal resistant, telephone line powered speaker phones designed to provide two-way handsfree communication. The E40's compact size allows it to be mounted in a standard single gang electrical box. The E40 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E40 faceplates (PNL40) can be purchased separately and are available in all five standard finishes.

The E40s blue LED continually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming ring. Note: LED not available on all models. Contact Viking for more information.

The E40 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller. The E40 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer.

The E40 features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed.

For outdoor installations where the unit is exposed to precipitation or condensation, the E40 Series is available with Enhanced Weather Protection (EWP). For more information on EWP, see DOD# 859.

UPC: 615687223194
Also known as: VK-E40WHEWP

Technical Specifications:
  • Ring Voltage: 25V AC RMS minimum (for auto answer)
  • Speaker Volume: Approximately 62db maximum @ 1m
  • Humidity: up to 100% humidity
  • Connections: (2) gel-filled butt connectors
  • REN: 0.8A
  • CPC Disconnect Time: 300ms minimum
  • Operating Temperature: -34 C to 65 C (-30 F to 150 F)
  • Shipping Weight: 0.45 kg (1.0 lbs)
  • Dimensions: Faceplate: 123.8mm x 79.4mm x 4.6mm (4.875 x 3.125 x 0.18), Phone: 72mm x 46mm x 42mm (2.84 x 1.8 x 1.65)
  • Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1B Talk Battery Booster (see DOD# 632).


For more information about the Viking Electronics E40WHEWP, please contact us.
  • Telephone line powered
  • Selectable auto answer feature for monitoring
  • Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
  • Microphone and speaker volume controls
  • PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes
  • Vandal Resistant Features: 16 gauge polished brass or 18 gauge 304 stainless steel faceplate, 316 stainless steel push button, carbon fiber reinforced plastic speaker screen, scratch resistant powder coating, hex drive mounting screws
  • Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
  • Mounting: Flush mounts in a single gang electrical box (2.25 deep x 2.00 wide x 2.84 tall minimum) or surface mounts in a Viking model VE-3x5 (not included, see DOD# 424)
  • Compact size: Front panel is the size of a typical single gang midsize wall plate
  • Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E-40-SS 304 Stainless Steel faceplate)
  • E-40-EWP is designed to meet IP66 Ingress Protection Rating (see DOD# 859 for more information)
  • Blue LED helps locate push button, indicate ringing and off hook
  • Programmable VOX (mic/speaker) switching speed

2 Reviews

  • 5
    VIKING-E40WHEWP

    Posted by 120520 on Nov 30th 2017

  • 5
    VIKING-E40WHEWP

    Posted by 80306 on Feb 9th 2015

Live Chat