Vanco EVSP1018 Evolution HDMI 1x8 Splitter Over Single Cat5e/Cat6 Cable

The Evolution by Vanco EVSP1018 HDMI 1x8 Splitter over Cat5e/6 with Bi-directional IR distributes one HDMI input to up to eight outputs over a single Cat5e/6 cable and one output over HDMI for daisy-chaining or to connect a local display. Turn one HDMI source into multiple displays that delivers 1080p High Definition resolution up to 131ft/40m per single Cat5e/6 output without any loss of quality or resolution. Evolution by Vanco Receiver EVEX3001 unit required for each UTP output utilized (sold separately). Also features EDID management, which allows and encourages source and display handshake for seamless integration. In addition, EVSP1018 is also equipped with bi-directional IR pass-through which allows for source or display control with EVEX3001 connected. Fully cascadeable with any Evolution by Vanco product to create additional outputs or to create an expanded distribution system. The EVSP1018 offers the most convenient solution for splitting one source into multiple displays.

UPC: 741835100373
Also known as: ZX-EVSP1018

Technical Specifications: Relative humidity: 20-90% RH (no condensation) Storage temperature: 4 - 140 degrees F Operation temperature: 32-104 degrees F Power consumption: 13 Watts [max] Power supply: 5V 4A DC Fixedness: 1RU rack-mount with ears Housing: Metal enclosure Rotary control switch: 8-dial modes for audio/video mode selection and EDID learning 3.5mm connector: TX and RX) IR Receiver/ IR blaster RJ-45 connector: WE/SS 8P8C with 2 LED indicators HDMI connector: Type A 19 pin female IR remote control: Electro-optical characteristics: t = 25° / Carrier frequency: 20-60kHz HDMI source control: Controllable via IR pass-through from IR receiver at RX to IR blaster at TX Input/Output: 1x HDMI / 1x HDMI + 8x RJ-45 PCB stack-up: 4-layer board [impedance control — differential 100; single 50] ESD protection: (1) Human body model +/- 19kV (air-gap discharge) & (contact discharge) (2) Core chipset - +/- 8k V Input DDC Signal: 5 Volts (peak to peak, TTL) Input TMDS Signal: 1.2 Volts (peak to peak) Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio HDMI over UTP transmission (8-bit: HD (1080p)-40m (131ft) [CAT.X] HD (720p/1080i)-50m (165ft) [CAT.X] Video Support: 480i / 480p / 720p / 1080i / 1080p60 12-bit Video Bandwidth: Single-link 225MHz [6.75Gbps] HDCP Compliance: Yes HDMI Compliance: HDMI Deep Color & full 3D

For more information about the Vanco EVSP1018, please contact us.