Vanco EVEX2005 Evolution HDMI Over Single Cat5e/Cat6 Cable Extender

  • MPN: EVEX2005
  • JMAC ID: 200416496
$257.72
JMAC_ID:
200416496
df_manual_boost:
1.75
The Evolution by Vanco EVEX2005 HDMI Extender over Single Cat5e/6 with Bi-directional IR and EDID management extends high definition video and audio signals and IR, at a distance of up to 131ft/40m over a single Cat5e/6 cable. Features EDID management, which allows and encourages source and display handshake for seamless integration. The result is an easy and flexible installation with low maintenance. With only one cost effective Cat5e/6 cable, high definition sources with HDMI outputs can be connected to high definition displays with HDMI inputs over long distances. Deep color video, DTS-HD or Dolby TrueHD audio, and HDCP is supported and compatible with the EVEX2005. In addition, EVEX2005 is also equipped with bi-directional IR pass-through which allows for source or display control.

The EVEX2005 includes two units: transmitting unit (EVEX2005-TX) and receiving unit (EVEX2005-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The EVEX2005 offers the most convenient solution for HDMI extension over a single Cat5e/6 with long distance capability, and is the perfect solution for any application.

UPC: 741835100267
Also known as: ZX-EVEX2005

Technical Specifications:
  • Relative humidity: 20-90% RH (no condensation)
  • Storage temperature: -4 - 140 degrees F
  • Operation temperature: 32-104 degrees F
  • Power consumption: 1.5 Watts
  • Power supply: (2) 5V2A
  • Fixedness: Wall-mounting case with screws
  • Housing: Metal enclosure
  • Rotary control switch: (TX) EDID Mode Selection; (RX) Signal level equalization
  • 3.5mm connector: (TX and RX) IR Receiver/ IR blaster
  • RJ-45 connector: WE/SS 8P8C with 2 LED indicators
  • Min DIN connector: DIN-9
  • HDMI connector: Type A 19 pin female
  • HDMI source control: Controllable via IR pass-through from RX to TX and from TX to RX with IR extenders
  • In/Out: 1xDIN9
  • Output: (TX) 1xRJ45 + 2x3.5mm; (RX) 1xHDMI
  • Input: (TX) 1xHDMI; ( RX) 1xRJ45 + 2x3.5mm
  • RS-232 Support: Yes
  • IR pass-thru: Full-duplex bi-directional
  • PCB stack-up: 4 layer board (impedance control - differential 100, single 50
  • ESD protection: (1) Human body model +/- 19kV (air-gap discharge) & (contact discharge) (2) Core chipset - +/- 8k V
  • Input DDC Signal: 5 Volts (peak to peak, TTL)
  • Input TMDS Signal: 1.2 Volts (peak to peak)
  • Signal Equalization: 8-level digital control at RX
  • Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio
  • HDMI over UTP: Full HD (1080p)-40m (131ft) [CAT.X]; HD (720p/1080i)-50m (165ft) [CAT.X]
  • Video Support: 480i/480p/720p/1080i/1080p @60
  • Video Bandwidth: Single-link 225MHz [6.75Gbps]
  • HDCP Compliance: Yes
  • HDMI Compliance: HDMI Deep Color, Full 3D


For more information about the Vanco EVEX2005, please contact us.
  • Pure unaltered uncompressed 7.1ch digital HDMI over a single Cat5e/6 cable transmission
  • Supports DTS-HD and Dolby TrueHD high bit rate audio
  • Allows cascading to create a larger distribution system
  • Wall mounting housing design for easy installation
  • Fully compatible with any Evolution by Vanco product
  • HDCP 2.0 compliant
  • Dimensions: 3.6” (91mm) W x 1.1” (28mm) H x 2.8” (71mm) D
  • Supports HDMI Deep Color & 3D
  • Features EQ distance dial for perfect transmission and reception of HDMI signals
  • Features EDID management which supports default HDMI EDID and has the ability to learn the EDID of display equipment
  • Supports up to 1080p High Definition resolution
  • Works with HDMI and HDCP compliant devices
  • Transmission Range: Extends 1080p resolution up to 131ft/40m over Cat5e/6
  • Wide band Bi-directional IR system allowing for control of source or display (IR accessories included) Wideband IR signal from 20KHz to 60KHz
  • Allows HDMI audio/video signals to be transmitted using a single Cat5e or Cat6 Cable
  • Extends HDMI transmission up to 40m (131ft) from the HDMI source at Full HD 1080p 24-bit
  • EDID manual select control - Supports copy EDID and auto EDID learning
Live Chat