Vanco EVEX2004 Evolution HDMI Over Single Coax Extender

  • MPN: EVEX2004
  • JMAC ID: 200416495
$674.99
JMAC_ID:
200416495
df_manual_boost:
1.75
The Evolution by Vanco EVEX2004 HDMI Extender over Single Coax with Bi-directional IR extends high definition video and audio signals and IR, at a distance of up to 394ft/120m over RG6 coaxial cable, and 164ft/50m over RG59 coaxial cable. Features Bi-directional IR, which allows for control of the source or display. Also features EDID management, which allows and encourages source and display handshake for seamless integration. With just a single coaxial cable, high definition sources with HDMI outputs can be connected to high definition displays with HDMI inputs over long distances. DTS-HD or Dolby TrueHD audio, and HDCP is supported and compatible with the EVEX2004. Compact design with mounting ears included, for an easy and flexible installation. A great solution for applications which already have an existing coaxial cable in place.

The EVEX2004 includes two units: transmitting unit (EVEX2004-TX) and receiving unit (EVEX2004- RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The EVEX2004 offers the most convenient solution for HDMI extension over a single coaxial cable with long distance capability, and provides a solution in applications where additional cables cannot be installed.

UPC: 741835100250
Also known as: ZX-EVEX2004

Technical Specifications:
  • HDCP Compliance: Yes
  • Relative humidity: 20-90% RH (no condensation)
  • Storage temperature: -4 - 140 degrees F
  • Operation temperature: 32-104 degrees F
  • Power consumption: 6 Watts
  • Power supply: (2) 5V2A
  • Fixedness: Wall-mounting case with screws
  • Housing: Metal enclosure
  • 3.5mm connector: (TX and RX) IR Receiver/ IR blaster
  • BNC connector: 75Ω interlocking socket
  • HDMI connector: Type A 19 pin female
  • IR Remote Control: Electro-optical characteristics: p = 25° / Carrier frequency: 20-60kHz
  • Output: (TX) 1xBNC + 1x3.5mm; (RX) 1xHDMI + 1x3.5mm
  • Input: (TX) 1xHDMI + 1x3.5mm; (RX) 1xBNC + 1x3.5mm
  • PCB stack-up: 6 layer board (impedance control - differential 100Ω, single 50Ω
  • ESD protection: (1) Human body model +/- 19kV (air-gap discharge) & (contact discharge) (2) Core chipset - +/- 8k V
  • Input DDC Signal: 5 Volts (peak to peak, TTL)
  • Input TMDS Signal: 1.2 Volts (peak to peak)
  • HDMI Equalization: Auto
  • Transmission Range: HD [1080p 24-bit color] – up to 120m [394ft]
  • Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio
  • Video Support: 480i / 720p / 1080i / 1080p60 (Does NOT support 480p)
  • Video Bandwidth: Single-link 225MHz [6.75Gbps]


For more information about the Vanco EVEX2004, please contact us.
  • Works with HDMI and HDCP compliant devices
  • Transmission Range: Extends 1080p resolution up to 394ft/120m over RG6 coaxial cable (dual and quad-shielded); Extends 1080p resolution up to 164ft/50m over RG59 coaxial cable
  • Dimensions: 3.35” (85mm) W x 1.1” (28mm) H x 3.19” (81mm) D
  • Supports up to 1080p/60 High Definition resolution
  • Supports video resolutions 480i, 576i, 720p, 1080i, and 1080p
  • 7.1-channel audio supported; Supports DTS-HD and Dolby TrueHD high bit rate audio
  • EDID manual select control - Supports Copy EDID
  • Fully compatible with any Evolution by Vanco product
  • Compact and wall mounting housing design for easy and robust installation
  • Allows HDMI audio/video signals to be transmitted using a single coaxial cable
  • Wide band Bi-directional IR system (20KHz to 60KHz) allowing for control of source or display

1 Review

  • 5
    VANCO-EVEX2004

    Posted by 72683 on Jul 24th 2014

Live Chat