TekTone SF102 Dual Bed Room Station Nurse Call System

The TekTone SF102 is a dual-bed nurse call room station designed for the Tek-CARE NC110 audible/visual nurse call system. Featuring two call cord jacks, an illuminated call-placed indicator, and a manual cancel button, it allows patients to request assistance from either bedside location. The station automatically registers a call when either connected call cord button is pressed or a cord is accidentally disconnected. Its flame-retardant ABS plastic faceplate, single-gang mounting configuration, and UL 1069 listing support patient call signaling in healthcare facilities.

TekTone SF102 Dual-Bed Nurse Call Room Station with Call Indicator and Cancel Button

The TekTone SF102 Dual-Bed Room Station provides patient-initiated nurse call signaling from two bedside locations through the Tek-CARE NC110 audible/visual nurse call system. The station features two jacks for compatible SF301-series call cords, allowing patients to request assistance by pressing the button on either connected cord. Activation registers a call at the nurse station annunciator, illuminates the associated corridor light, and activates the corridor zone light when installed. The automatic call registration function also responds when either call cord is accidentally removed, ensuring that an unplugged cord produces a call indication rather than going unnoticed. The SF102 is designed for patient rooms requiring two calling positions without integrated voice communication.

The SF102 incorporates a lighted call-placed indicator and combined cancel button that provide visual confirmation and local reset of an active nurse call. When either call cord is activated or disconnected, the call-placed indicator illuminates to identify the active station. Pressing the cancel button clears the call through the connected nurse call system. The station uses plug-in electrical connectors and two call cord receptacles for communication with compatible TekTone equipment. All switching and signaling electronics are mounted on an internal circuit board, while the call cords provide the patient-operated activation mechanism. The SF102 requires a compatible nurse call system and does not function as an independent alarm or communication device.

The TekTone SF102 measures 4.5 inches high, 2.75 inches wide, and 1.75 inches deep (114 x 69 x 44 mm) and features a white, flame-retardant ABS plastic faceplate. Its compact construction supports mounting with a single-gang electrical ring or a single-gang ring installed on a dual-gang electrical box. The faceplate contains the call-placed indicator, cancel button, and two call cord jacks in an accessible bedside configuration. Plug-in connectors simplify installation and replacement within compatible nurse call wiring systems. The station accommodates two SF301-series patient call cords, which must be selected according to the connected system and patient application. The call cords and required nurse call control equipment are separate system components.

The TekTone SF102 is UL 1069 listed under UL File E71599 for applicable hospital signaling and nurse call applications. It is specified for use with the Tek-CARE NC110 Nurse Call System, which coordinates room call stations, nurse station annunciators, corridor lights, and optional corridor zone lights. Its dual-cord arrangement supports shared patient rooms, nursing facilities, and healthcare environments requiring two bedside calling points connected to a common station. Unlike a single-bed room station, the SF102 accommodates two patient call cords while using one wall-mounted device. Installation requires compatible SF301-series call cords, approved nurse call system wiring, and configuration according to TekTone installation instructions and applicable healthcare signaling requirements.