TekTone LI381 Corridor Dome Light Nurse Call Indicator

  • MPN: LI381
  • JMAC ID: 200301600
$43.98
+ Free Shipping
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200301600
df_manual_boost:
2.20
Please Note: In order to keep our prices low, we have a minimum order requirement of $99

The TekTone LI381 is a single-lamp corridor dome light designed to provide visual call indication for compatible Tek-CARE nurse call and CM800 emergency call systems. Operating on 24VAC or 24VDC at 51mA, it displays steady illumination for routine calls and rapid flashing for emergency calls when controlled by the connected system. The unit features a white translucent snap-in lens, replaceable #1829 incandescent bulb, and flame-retardant mounting panel. Measuring 4.6 inches square, the LI381 is UL 1069 listed and fits compatible single- or double-gang electrical boxes.

TekTone LI381 Corridor Dome Light for Nurse Call and Emergency Call Systems

The TekTone LI381 Corridor Light is a wall-mounted visual signaling device designed to identify active calls within healthcare nurse call and emergency communication systems. Featuring a single incandescent indicator lamp and a white translucent dome lens, the LI381 provides visible notification outside patient rooms, treatment areas, assisted-living accommodations, and other locations where staff require immediate awareness of assistance requests. The light operates with compatible Tek-CARE NC110, NC150, NC200, NC300II/III, Tek-CARE500, and CM800 emergency call systems, depending on the installed control equipment. When a routine call is initiated, the corridor light illuminates steadily. Emergency calls produce rapid flashing when the connected system supplies the corresponding signaling sequence, allowing staff to distinguish different call priorities through the visual indication.

The LI381 operates from a 24VAC or 24VDC electrical supply with a manufacturer-rated current consumption of 51mA. Its illumination source is a replaceable #1829 incandescent bulb rated at 28V and 70mA, providing a serviceable alternative to permanently integrated LED signaling assemblies. The lamp is enclosed by a white translucent polystyrene lens designed to distribute the illuminated indication across the visible surface. A removable snap-in lens allows maintenance personnel to access the bulb without specialized tools, simplifying routine servicing and replacement. The mounting assembly incorporates a flame-retardant HIPS plastic panel meeting UL 94V-0 material requirements. The LI381 functions as a remote visual annunciator, with steady or flashing operation determined by the compatible nurse call or emergency call system rather than by an independent controller inside the light.

Designed for patient room corridor signaling and emergency assistance notification, the TekTone LI381 connects to compatible call stations, master annunciators, and power/control equipment through the applicable system wiring. In conventional nurse call installations, the light indicates when an associated patient or emergency station has initiated a request, helping caregivers identify the location requiring attention. The device can also be used with TekTone's CM800 emergency call annunciation system and supported Tek-CARE500 wireless emergency call installations equipped with compatible NC50xES-series remote receivers and external signaling controls. Depending on the system configuration, compatible TekTone controllers such as the PK152 provide the electrical signaling required for routine and emergency indications. The LI381 is a single-lamp, white-lens annunciator; applications requiring separate red and white zone indications can use the related LI382 or LI382LED corridor zone light.

The TekTone LI381 measures approximately 4.6 inches high, 4.6 inches wide, and 3.3 inches deep, with a white flame-retardant translucent lens mounted on a durable plastic base. Its mounting arrangement accommodates a standard single-gang or double-gang electrical box and mounting ring, providing flexibility for compatible new installations and replacement applications. The snap-in lens permits convenient lamp access while maintaining the enclosed appearance of the corridor indicator. TekTone identifies the LI381 as UL 1069 listed under UL File E71599 for use in compatible nurse call signaling applications. The light requires an appropriate external power and control source and does not independently generate alarm signals or audible announcements. With its straightforward electrical requirements, replaceable illumination source, and compatibility with established TekTone signaling equipment, the LI381 provides a practical visual notification component for maintaining nurse call and emergency communication systems.



UPC: 812664020078
Also known as: T9-LI381

Technical Specifications:
  • Alarm Type: Visual
  • Application/Usage: Corridors, Emergency
  • Durability: Flame Resistant
  • Form Factor: Gang Box Mount, Panel Mount
  • Product Type: Patient Call Light
  • Product Color: White
  • Light Color: White
  • Package Contents: LI381 Patient Call Light Lens
  • Certifications & Standards: UL 1069 Listed
  • Lens Material: Polystyrene
  • Power Source: AC Supply, DC
  • Features: Flame Resistant
  • Input Voltage: 24 V DC


For more information about the TekTone LI381, please contact us.
  • UL® 1069 Listed
  • Snap-in lens
  • Easy bulb replacement
  • Attractive flame-retardant HIPS30 plastic panel
  • Excellent visibility

1 Review

  • 5
    TEKTONE-LI381

    Posted by 75220 on Sep 30th 2014

Live Chat