Takex FS-3500 Flame Sensor

The FS-3500 Flame Sensor immediately detects UV rays contained in flames to trigger a pre-recorded "flame prohibition" or "non-smoking" message output in a choice of 5 languages; English, Spanish, Japanese, Chinese and Korean. The sensor can be powered from two type-AA alkaline batteries (supplied) or hardwired (10-30VDC), and features a detachable base unit with a snap-in/out design for easy installation.


Also known as: FS3500

Technical Specifications: Appearance: ABS resin (white) Functions: Tamper signal, Low battery indication Installation: Indoor Ambient temperature: -10°C to +60°C (+14°F to +140°F) without condensation (battery performance may decrease below 0°C and above 40°C) Wiring: By terminals Tamper: Relay contact output NC is issued when the sensor is detached from the base unit, Output AC/DC30V 0.1A LED: Indication: RED, Alarm: Flash during message output, low battery: flash 0.1sec every 5sec Signal output: Relay contact output NO/NC selectable, Detection time plus 2 sec., Output DC30V 0.1A Power consumption(External DC power): Standby: 40mA or less, Alarm: 300mA or less Battery life: Type-AA alkaline battery: Approx. 2 years (stand-by), (Note: above figure is for reference only and not guaranteed) Power supply: Type-AA alkaline battery (LR6) 2pcs / DC3V - included, External wiring 10-30VDC (Polarized) Detection Timer: 4 steps (1s, 3s, 6s, 15s) Detection Sensitivity: 2 levels - H (100%), L (50%) Detection angle: 120 degrees (conically) Detection distance: 10m (33ft) max. (7cm flame) Detection system: Ultraviolet rays detection (185~260nm)

For more information about the Takex FS-3500, please contact us.