System Sensor P4R-P Horn Strobe, Red, Wall Mount, Four-Wire

  • MPN: P4R-P
  • JMAC ID: 200411294
$101.92
JMAC_ID:
200411294
df_manual_boost:
1.75
The SpectrAlert Advance P4R-P is an unmarked, red, four-wire horn strobe with selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd.

UPC: 783863044366
Also known as: BK-P4RP, P4RP

Technical Specifications:
  • Wall Mount Dimensions: 5.6"L x 4.7"W x 2.5"D (142 mm L x 119 mm W x 64 mm D)
  • Wiring Gauge: 12 to 18 AWG
  • Voltage: Regulated 12DC/FWR or regulated 24DC/FWR
  • Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
  • Operating Temperature: -40F to 151F (-40C to 66C)
  • Mounting: Wall
  • Maximum Humidity: 10 to 93% non-condensing
  • Location: Indoor
  • FWR Max Op Current: (see Data Sheet for complete current draw information)
  • DC Max Op Current: (see Data Sheet for complete current draw information)
  • Candela: Selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd
  • Color: Red


For more information about the System Sensor P4R-P, please contact us.
  • Field-selectable candela settings of 15, 15/75, 30, 75, 95, 110, 115
  • Rated from 32F to 120F (indoor devices); 40F to 151F (NEMA 4X, IP56 weatherproof devices)
  • Optional tamper-resistant Torx head screw
  • Compatible with System Sensor synchronization protocol
  • Wall Mounting
  • Plain or ALERT-printed white housings
  • Clear or Amber lens strobes and speaker strobes
  • Color lens attachments for use with clear lens wall or ceiling strobes or clear dual strobe expander plates
  • Dual Strobe Expander Plates for use with Strobe and Speaker Strobe devices
  • Meets DoD specification requirements
  • Plug-in design for simplified installation and troubleshooting
  • Mounting plate shorting spring easily tests wiring continuity
  • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
Live Chat