System Sensor CHSW Chime/Strobe, White

• Plug-in design
• Shorting spring on mounting plate for pre-installation
• continuity check
• Captive mounting screw
• Torx screw for tamper resistance
• Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115
• Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
• Minimal intrusion into the back box
• Rotary switch for tone selection
• Two volume settings
• Electrically compatible with existing SpectrAlert products
• Listed for ceiling or wall mounting

• Standard Operating Temperature: 32F to 120F (0C to 49C)
• Humidity Range: 10 to 93% non-condensing
• Strobe Flash Rate: 1 flash per second
• Nominal Voltage Regulated: 12DC/FWR or regulated 24DC/FWR1
• Operating Voltage Range: 8 to 17.5V (12V nominal) or 16 to 33V (24V nominal)
• Input terminal wire gauge: 12 to 18 AWG
• Chime dimensions (including lens): 5.6" L 4.7" W 2.5" D (142 mm L 119 mm W 64 mm D)
• Chime dimensions" 5.6" L 4.7" W 1.3" D (142 mm L 119 mm W 33 mm D)
• Color: White