Space Age SSU00457 FR4 Fast Rail for 4 System Sensor Modules
-
MPN: SSU00457
-
JMAC ID: 200108934
The Space Age Electronics SSU00457 is a heavy-duty FR4 Fast Rail mounting bracket designed to securely organize and support up to four System Sensor-style 4-inch-square addressable fire alarm modules within compatible fire alarm equipment cabinets or wall-mounted installations. Part of the Space Age Electronics AceRox Fast Rail Series, the SSU00457 features 20-gauge galvanized steel construction, spring-loaded snap-in module retention, and integrated wire chases with edge protectors to simplify module installation and protect field wiring against damage. Measuring 18 inches long by 4-5/16 inches wide by 2-1/2 inches deep, the FR4 provides a compact, organized mounting platform with multiple predrilled mounting hole patterns for horizontal or vertical wire routing. Compatible with the Space Age ACE A (SSU00655) and ACE D (SSU00657) equipment cabinets, the SSU00457 allows individual addressable modules to be installed and serviced while maintaining access to wiring terminals and address-selection switches. Made in the USA, the FR4 Fast Rail is designed for commercial and institutional fire alarm installations requiring organized module mounting, accessible field wiring, and efficient equipment cabinet integration.
Space Age Electronics SSU00457 FR4 Fast Rail Four-Module Mounting Bracket
The Space Age Electronics SSU00457 FR4 Fast Rail Module Holder provides a dedicated mounting solution for organizing multiple addressable fire alarm interface modules within commercial and institutional fire protection systems. Manufactured by Space Age Electronics as part of the AceRox FR2/FR4 Fast Rail family, the SSU00457 is designed to accommodate four System Sensor-style addressable modules using the standard 4-inch-square mounting format. Its modular construction allows fire alarm installers to secure individual modules along a common steel rail rather than using separate mounting boxes or brackets for each device. The assembly incorporates a spring-loaded snap-in retention system, enabling compatible modules to be installed without separate module-retaining fasteners. This arrangement supports clean equipment layouts, consistent module positioning, and improved accessibility during installation and maintenance. The FR4 is particularly useful for fire alarm systems incorporating multiple addressable monitor modules, control modules, or relay modules that require organized mounting within dedicated auxiliary equipment enclosures. Typical applications include commercial office buildings, healthcare facilities, educational institutions, warehouses, industrial properties, and multi-building fire alarm installations requiring centralized module organization.
The SSU00457 is manufactured from durable 20-gauge galvanized steel, providing a rigid mounting structure designed for repeated installation and servicing of compatible addressable modules. The manufacturer specifies overall dimensions of 18 inches (457 mm) long, 4-5/16 inches (110 mm) wide, and 2-1/2 inches (64 mm) deep, allowing four standard-format modules to be arranged along a single mounting rail. The galvanized steel construction provides corrosion resistance appropriate for protected fire alarm equipment installations, while its formed metal design supports secure positioning of the mounted devices. The rail incorporates multiple factory-punched mounting holes for attachment to compatible cabinet backplates or prepared wall surfaces. Integrated wire chase openings support vertical or horizontal field wiring arrangements, allowing installers to route signaling line circuit conductors, relay wiring, and other appropriate connections through the mounting assembly. The FR4 also includes edge protectors at designated wiring openings, helping prevent insulation damage and accidental conductor shorts caused by contact with exposed metal edges. Its passive mechanical design requires no electrical power, programming, or separate electronic control components.
For addressable fire alarm installations, the Space Age SSU00457 provides organized mounting for four compatible System Sensor-style modules while preserving access to their electrical terminals and address-selection controls. Each module mounts independently within the rail, allowing technicians to install, inspect, replace, or service an individual module without removing the complete mounting assembly. The spring-loaded retention system helps maintain consistent module alignment while reducing the number of mounting fasteners required during initial installation. The integrated wire management channels provide a defined routing path for field conductors, helping separate wiring from module mounting locations and reducing clutter within electrical cabinets. The SSU00457 is specifically identified for use with compatible Space Age Electronics ACE A (SSU00655) and ACE D (SSU00657) auxiliary cabinets. The ACE A cabinet accommodates up to two FR4 rails for a total of eight compatible modules, while the larger ACE D cabinet accommodates up to four FR4 rails for a total of sixteen modules. These cabinet arrangements allow fire alarm contractors to consolidate compatible addressable modules within a serviceable equipment enclosure. Actual module compatibility, electrical circuit separation, enclosure capacity, and installation approvals must be verified against the applicable equipment documentation.
Installation of the Space Age Electronics SSU00457 FR4 Fast Rail involves securing the galvanized steel mounting assembly to a compatible enclosure backplate or appropriately prepared mounting surface using its factory-provided mounting holes. The rail can be installed in configurations that allow vertical or horizontal field wiring routes, depending on the available cabinet space and the required module arrangement. Once the rail is mounted, compatible 4-inch-square System Sensor-style addressable modules snap into the spring-loaded retaining positions, eliminating the need for separate module mounting screws where the manufacturer's snap-in arrangement is applicable. Wiring can then be routed through the designated chase openings, with the supplied edge protectors installed to reduce abrasion and accidental shorts. The rail's layout leaves terminal connections and rotary address switches accessible, enabling technicians to complete SLC addressing, circuit termination, inspection, and troubleshooting while modules remain installed. For cabinet-based installations, the manufacturer identifies the ACE A and ACE D enclosures as compatible mounting options with removable access doors that simplify inspection and maintenance. The SSU00457 is a mechanical mounting accessory and does not include addressable fire alarm modules, electrical terminal connections, supervision electronics, or a fire alarm control panel. The related SSU00452 FR2 Fast Rail provides a shorter two-module mounting alternative for smaller applications. Manufactured in the United States, the SSU00457 combines four-module capacity, galvanized steel construction, snap-in module retention, and protected wire routing to support organized, serviceable addressable fire alarm equipment installations.
UPC: 849137001708
Also known as: O6-SSU00457
Technical Specifications:
|
For more information about the Spaceage SSU00457, please contact us.
2 Reviews
-
SPACEAGE-SSU00457
-
SPACEAGE-SSU00457