Space Age E120V-GT 120V Hybrid Surge Protection Device
-
MPN: E120V-GT
-
JMAC ID: 200414285
The Space Age Electronics E120V-GT is a 120 VAC single-phase hybrid surge protection device from the ECLIPS Series, designed to protect fire alarm control panels, mass notification systems, and electrical equipment against transient voltage surges. Featuring a 25,000-amp maximum surge current rating, 500-joule energy dissipation capacity, and 10kA short-circuit current rating, it provides line-to-neutral, line-to-ground, and neutral-to-ground protection. The hardwired, parallel-connected device includes thermally fused hybrid surge suppression, an LED status indicator, and an ELOCK circuit breaker lockout kit for fire alarm installations.
Space Age Electronics E120V-GT ECLIPS 120V Hybrid Surge Protection Device
The Space Age Electronics E120V-GT Hybrid Surge Protection Device provides transient voltage surge suppression for 120 VAC single-phase electrical circuits supplying fire alarm control panels, mass notification equipment, power amplifiers, and other sensitive electronic systems. Part of the ECLIPS Surge Suppression Series, the E120V-GT uses a thermally fused hybrid protection design to limit voltage transients caused by lightning-related disturbances, utility switching, and internally generated inductive loads. Its 25,000-amp maximum surge current rating and 500-joule energy dissipation capacity support protection against short-duration electrical surges that can damage connected equipment or interrupt system operation. The device operates through a hardwired parallel connection, protecting line-to-neutral (L-N), line-to-ground (L-G), and neutral-to-ground (N-G) circuits. An integrated LED diagnostic indicator provides visual confirmation of proper surge protection operation, while the self-restoring design allows the device to continue protecting equipment following transient events within its operating capabilities.
The E120V-GT surge suppressor operates on 120 VAC single-phase power at 50/60 Hz, with a maximum continuous operating voltage (MCOV) of 140 VAC. Its electrical performance specifications include a 10kA short-circuit current rating (SCCR), 25kA maximum surge current capacity, and a clamping response time of less than 5 nanoseconds. Under UL 1449 testing, the device provides voltage protection ratings (VPR) of 700V line-to-neutral, 700V line-to-ground, and 600V neutral-to-ground, with a manufacturer-specified clamping voltage of 230V RMS. The unit has a capacitance of less than 2,000 picofarads and incorporates thermal fuses to protect against hazardous conditions associated with component failure or electrical faults. Its hybrid design combines surge suppression technologies to limit transient overvoltages while maintaining a non-load-bearing configuration. The E120V-GT is ANSI/UL 1449 4th Edition listed as a Type 2 surge protective device, with UL file number E319370, and is identified by the manufacturer as compliant with CSA C22.2 No. 269.2-17, Type 2.
The Space Age Electronics E120V-GT features a compact green UL94 QMFZ2/8-rated enclosure designed to provide ultraviolet resistance and mechanical protection for the internal surge suppression components. The device supports surface mounting using two external mounting holes or conduit mounting through a 3/4-inch rigid coupling, allowing installation adjacent to compatible electrical distribution equipment. Three factory-installed 18-inch, 14 AWG conductors provide line, neutral, and ground connections, including a green grounding conductor for connection to the electrical system ground. The unit weighs approximately 5.2 ounces and includes an LED indicator that illuminates when the surge protective device is operating properly. Its parallel wiring configuration allows the E120V-GT to connect to the protected electrical circuit without carrying the equipment's normal operating load. The manufacturer recommends keeping the conductors between the surge protector, power connection, and grounding system as short as practical while avoiding unnecessary bends. The standard E120V-GT package includes the Acerbox ELOCK Circuit Breaker Lockout Kit, providing circuit identification and lockout accessories for applicable fire alarm power installations.
Designed for fire alarm systems, emergency mass notification equipment, security infrastructure, dedicated electrical branch circuits, motors, pumps, and power boosters, the E120V-GT supports electrical surge protection in commercial, industrial, and institutional facilities. Its thermally fused hybrid suppression circuitry and self-restoring operation help maintain protection against transient disturbances, while the LED indicator provides maintenance personnel with a straightforward method of checking device status. Space Age Electronics identifies the E120V-GT for applications addressing NFPA 72 Section 10.6.5.5 and NFPA 70 Section 760.33, subject to the applicable code edition and installation requirements. The included ELOCK circuit breaker lockout kit supports identification and securing of dedicated fire alarm power circuits. Manufacturer installation instructions specify using the device in conjunction with a 30A circuit breaker and maintaining proper grounding and wiring practices. Installation must be completed by qualified electrical personnel with all power disconnected and in accordance with the manufacturer's E120V-GT Installation Instructions (LT10643), the National Electrical Code, and local requirements. The E120V-GT is a 120 VAC surge protective device and does not provide voltage regulation, battery backup, or independent power to connected equipment.
UPC: 849137001869
Also known as: O6-E120VGT, E120VGT
Technical Specifications:
|
For more information about the Spaceage E120V-GT, please contact us.
1 Review
-
SPACEAGE-E120V-GT